Jump to content
SAU Community

Recommended Posts

I've finaly managed to get a copy of my dyno graph with the same setup as sly but running less boost:

The one below indicates boost i'm running at high and low boost

270hp.gif

This one shows AFR:

270hp_AFR.gif

These were the end result of tuning my car (not in shootout mode) after 4 hours on the dyno.

How does it compare to slys?

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

mrk25t, you said your boost is set low 7psi, high 10-11psi, but on the dyno chart it indicates about 170kPa which is 17psi isnt it?

also why did you change to a Z32? i was told that they arent a restriction until you want to run high boost levels or go over 250rwkw?

mrk25t, you said your boost is set low 7psi, high 10-11psi, but on the dyno chart it indicates about 170kPa which is 17psi isnt it?

also why did you change to a Z32? i was told that they arent a restriction until you want to run high boost levels or go over 250rwkw?

I'd be slightly disapointed if I was running 17psi and getting only a bit about 200kw. I was told that 200kPa was 1bar and 100kPa was 0.

My AFM was maxing out (5.1v) so upgraded it.

You can see that my AFR is dead straight along the 12 which is different to yours.

RNS11Z, what park did you see my car? your not in adelaide are you?

Shane, had the car out for a good run tonight -nearly hit a bloody kangaroo through the hills!

-about the injectors, they are at 90%!

MRK25T- now i see why you changed, the air was cool tonight, and my AFM was maxing out by late 4k-5krpm, and it wouldnt rev nicely or make good power up top. Gonna have to get me a Z32!

2fardown- are you saying kPa is kilometers per hour?

i ran a mate with same setup as me, but stock turbo, we both ran 1bar, he has rwkw in the 190's, i had an extra person onboard and big heavy 19's and even with the AFM maxing out, i still pulled away reasonably. Cant wait to get it all sorted and retuned with the new dump and Z32 AFM.

SLY33, there is white r33 in qld with its plates as your nick and a massive front mount. My bad i confused it with your car. I didnt know u were in SA.

A note on this z32 air flow metre, we tried 3 different z32 air flow metres on this r33 skyline and it did not make any power difference at all. Supposedly z32 and r33 air flow metres are the same.

SLY33, there is white r33 in qld with its plates as your nick and a massive front mount. My bad i confused it with your car. I didnt know u were in SA.

A note on this z32 air flow metre, we tried 3 different z32 air flow metres on this r33 skyline and it did not make any power difference at all. Supposedly z32 and r33 air flow metres are the same.

it wont give u more power but give u greater tuning resolution so it wont max out at 5000rpm

MR25KT,

I am running 17 psi and only making 205 kw@ rears (but Dyno's aren't Dyno's anyway), but it depends on the turbo and how it makes that boost. My turbo is a high flowed standard, and it is definitley past it's efficency.

Jeff.

Indeed Jeff. I had a high flow before this turbo and ran more boost and achieved less power - I was running 0.8bar with that turbo.

  • 8 months later...

hey guys i know stuff all about being a mechanic, looks like some of u have really bad results while others have good results. Seems like most of u like to blame dynos and such, but id say what it would come down to is to blame the tuner?? Id say there are some pretty bad tuners out there, id say some even work for big, well known workshops. Just my 2 cents.

Am i totally off track? Let me know what u think!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...