Jump to content
SAU Community

Recommended Posts

G'day guys

As the title says, my R33 has suddenly become very laggy. Boost takes for ever to build up and the car just generally sucks to drive. I'm having more fun driving the getz around atm.

First noticed it last saturday evening. Took the car out friday in the middle of the day and it was all good. Was a very hot day if I recall, and I did a fair bit of driving. Couple hundred K's here and there.

I've had a problem with the gearbox for a while now, its crunches in 4th if I shift too quickly. Friday evening it had a nice big crunch. First time in months. I dont think thats the problem though since the lag is through all the gears. Even reverse. I've gotta rev the car to 3000 just to get out of the driveway.

Im thinking it may be a vacume leak. Have not had the time to do any test as of yet as the christmas season has me pretty busy.

If anyone has any ideas regarding what it could be and what I should do, I'd be very greatfull.

Cheers

NB. Car is an R33 GTS-T S2 - RB25. No modifications to engine/induction or exhaust.

"I've had a problem with the gearbox for a while now, its crunches in 4th if I shift too quickly. Friday evening it had a nice big crunch. First time in months. I dont think thats the problem though since the lag is through all the gears. Even reverse. I've gotta rev the car to 3000 just to get out of the driveway. "

Clutch sounds farked to me....

Slipping clutch wouldn't make the car laggier - it would just free rev once it hit boost and you wouldnt go anywhere at all...

Im with Nismoid sounds like a lieak somewhere, more than likely cooler pipe popped off or got loose on the hot day...

If it was a vacuum leak the AFM would be reading incorrectly so the car would be dumping black petrol smoke out the exhaust and the acceleration would be very rough.

Check your waste gate actuator.

22312910.jpg

ignore the wastegate arm needs to be shorter bs it's just an image I found on google to explain the actuator arm

make sure it's attached correctly etc.

Electrical issues usually result in poor delivery, like the car no longer revs smoothly. If there is an issue with the actuator the car will still rev smoothly it's just the turbo won't spool till like 4000rpm.

Yes the turbo will still spool with the wastegate open on a stock turbo it just adds like 2000rpm to the spool and it only gets like 5psi.

Edited by Finny

Does anyone think this could be a leak at the exhaust manifold? I have a couple of broken manifold studs at the moment (RB engines are prone to it) and my turbo also seems to be taking a bit longer to spool these days.

Is the car making any different noises at all? Does it still reached the same boost level it used to or will it not go that high? How much different is the lag. Like 500rpm laggier or 1500?

I would say leaky cooler piping or exhaust manifold leak.

What relevance does having to rev it to 3000 have to do with it being laggy? Are you saying that it's down on power, and if you don't have the revs up that high the engine will stall? Or at you saying it's as though the gearbox was jamming, or the handbrake was on? Just reading that line is suggesting the latter to me, which contradicts the rest lol

what is your boost guage doing??

is the car laggy?? as in boostwise?? or lethargic?? as in just doesnt feel like its going anywhere when you put your foot down??

if the gears are crunching etc.. and you have to rev it to 3000rpm to get out of your driveway... the clutch could well and truly be farked.. which would make it feel like it was very lethargic as the engine would be revving as normal, but only 50% of that would be making it to the rear wheels..

are there any weird or disgusting smells?? if your exhaust manifold is leaking, you will see a black soot or burn mark on nearby components.. aka, on the firewall, or on the head or cam covers.

given that it doesnt have any modifications, therefore, there is little chance of things being tinkered with and coming undone.. id be pointing at clutch.. it is the only wear item and are due for replacment at anything over 100000kms.

if you have a vacuum leak, you should be able to hear a hissing noise on idle.. or a boosting noise on boost. spray some carby cleaner around all your vacuum lines and see which one makes the engine die down a bit.

now heres something that noone has mentioned yet... if your clutch is slipping, then there is less load being placed on the engine, so the more you put your foot down, the more the clutch slips... rather than having the load of the gbox diff and wheels.. so the engine is under what it thinks as less load.. so the turbo wont boost as hard.. like when your driving up a hill, if you put your foot down, the turbo will boost up almost instant, as there is alot of load being placed on the engine, more fuel, more exhaust, quicker boost.

dont forget the difference between turbo response and turbo lag. its two different things that a commonly misdiagnosed.

turbo response is when you put your foot down, and how soon it responds and starts to spin faster.

turbo lag is when you put your foot down and it starts to spin faster, how long it takes for the turbo to actually start producing a positive boost pressure.

cheers

Linton

With the gear box 4th gear crunch, get some Redline Shock Proof gear oil and that will help to elliminate the crunch problem.

If its you clutch get up to speed in 4th or 5th gear and put left foot on the brake hard and right foot on the accelerator and if the engine revs up then your clutch is on its way out.

Cant say for sure about the lag or poor response part with out driving the vehicle..

Cheers

With the gear box 4th gear crunch, get some Redline Shock Proof gear oil and that will help to elliminate the crunch problem.

If its you clutch get up to speed in 4th or 5th gear and put left foot on the brake hard and right foot on the accelerator and if the engine revs up then your clutch is on its way out.

Cant say for sure about the lag or poor response part with out driving the vehicle..

Cheers

hey kyle :)

couldnt you just pull the handbrake on in your driveway and let the clutch out in 1st?? if the engine dies down, clutch is ok.. if the engine doesnt die as you let the clutch out.. clutch is bad.

bit better than messing around with the brakes at 4/5th gear speeds.

Does anyone think this could be a leak at the exhaust manifold? I have a couple of broken manifold studs at the moment (RB engines are prone to it) and my turbo also seems to be taking a bit longer to spool these days.

Yep can be, exhaust manifold pressure would be down from the leak and result in a longer spool up. However if it was leaking that bad you would hear it very easily.

Im only talking at speed of 60 to 80 k's which is quite normal in any given city

Have a drive on the highway and give it a few hard runs up to 110 or something. As PMR33 said if it was a big exhaust leak you would probably hear it pretty easily. Need more info on your boost, what your boost gauge does when your loading up the engine and need to put some figures on the lag. If you only get to 2 psi and doesnt pull any higher after that etc then definately check your cooler piping for splits/leaking or shitty hose clamps.

hey kyle :)

couldnt you just pull the handbrake on in your driveway and let the clutch out in 1st?? if the engine dies down, clutch is ok.. if the engine doesnt die as you let the clutch out.. clutch is bad.

bit better than messing around with the brakes at 4/5th gear speeds.

if your clutch slipped just doing that you wouldnt even be able to drive. when they first start slipping they only do it under high load, usually peak torque in 4th and 5th. get on the freeway and load it up in 5th and compare your speed to your rpm, if the rpm goes higher than it should for the speed your doing then your clutch is mcfked

Thanks for such a quick and thorough response guys. Have not had time to diagnose the problem yet. Will be free boxing day to test it all out and get some more info.

For now, the following is all I know.

There is no black smome coming from the exhaust.

No irregular noise, though i havn't really been listening to for it. I'll check it next time.

3000 rpm just to get out of the driveway was a bit too enthusiastic. More like 2000rpm. Thats in reverse and my driveway sits at about 30 degrees inclination. Hand brake is not engaged.

When I hit boost, the revs jump up about 1-2k and the car wont really accelerate for a atleast 3-4 seconds. Boost pressure builds slower and its not reaching as high.

@100Km/h its use to sit at around 2.5k now its at about 3k.

From what I understand now, it appears to be poor response not lag.

Thanks again guys. Will report back on the weekend when i've had time to test all my options.

Cheers

Edited by Aidan
  • 2 weeks later...

Hey guys, so its been a while and well, the car finally gave up. Going down the highway, stopped at a set of lights then wouldn't go anywhere it was time to go. Locked into gears fine, just wouldn't budge.

What I forgot to tell you guys before was that I was messing around with double clutching... :D Had never done it before and decided to give it a go(I did not just watch fast and furios again). Seemed pretty hard at first but got the hang of it, just cant brake as well. Heel toe is a no go for me. Anyway, a mate of mind spoke to his mechanic and he was saying something about double clutching in the 33's screwing up the syncros or something. I dont know much about gearboxes, but I thought double clutching took the wear off the syncros?

Anyone have any insight to this syncro business with the 33's??

Could screwed syncros be the issue with my car or is it more than likely the clutch?

Need to figure this out before I go out and order a clutch from Jim. Dont really want to get a new one if I dont need it ya know? Money is tight atm.

Advice is much appreciated.

Cheers

The reason your gearbox is making noises sound definetly like the synchros but i dont see how double-clutching it would make it any worse, have the same crunch in forth, works better if you double clutch it or just dont change it as fast, same goes for a mate of mine on one of his last cars, had the synchros changed=no prob'. The whole 'double-clutch' thing comes from old non-synched gearboxes BTW...

But it really cant be the reason it doesnt rev up as it should, does it feel like the car is struggling to get speed or is it just a lack of power?

Does it rev freely when in neutral/clutch pressed?

Check things like faulty Lambda sensor, AFM, CAS (Cam Angle Sensor, in front of engine) or if the turbo is blown, should give alot of smoke though.

Other things like bad compression for some reason, might be blown headgasket, still should give smoke but get a comp test done if needed :D Had a customers Celica ST205 running like crap, didnt smoke but the headgasket was blown and was actually leaking small amounts of cooling fluid from the back of the block!

Have you done the ECU-diagnostics test? Shorting the 2 wires on the top left of the grey diagnostics connector, engine light should lid up, giving you 5 long/5 short signals="All OK" otherwise it just to check in the manual what it says :P

Edited by brother_david

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...