Jump to content
SAU Community

Recommended Posts

1993 NISSAN R32 SKYLINE GTR - SILVER

Engine

- Racepace Stage 1 (all the usual oil gallery mods, head cleaned up with new guides, shims, valves etc, new 33GTR crank, forged pistons, block chemically cleaned, deburred, decked, honed etc etc)

- Garrett 2860-5 turbo’s

- X-force dump pipes

- Custom 3.5” Exhaust

- APEXi Power FC

- 700cc Injectors

- Bosch Motorsport 044 Fuel Pump

- Splitfire coil packs

- ARC 106mm Front Mount Intercooler

- Custom Racepace oil cooler with metal ducting

- Custom Racepace catch can

- Remote oil filter kit

- JJR 40mm aluminium radiator

Engine and turbo’s have done approximately 10,000kms. All mechanical work performed by Racepace since I bought the car so all history can be verified on their database. Have receipts too. No expense was spared ie whatever Ben suggested should be done was done no questions asked. Touch up tune by Ben on 1/11/09 for a safe 377rwkw on 98 octane.

Drivetrain

- 33 GTR 5 speed manual

- Exedy Twin Plate Clutch

- Nismo GT LSD Pro 1.5way (5000kms old)

Suspension & Brakes

- Alcon 6 pot 365mm fronts. Standard rears with DBA4000 slotted rotors.

- Braided brake lines all round (ADR approved)

- Jap spec coilovers (Racepace replaced my old Teins with these ones however not sure what brand. Will have to jack car up and have a look)

- Custom upper arms and castor rods from Centreline suspension

- Whiteline adjustable front and rear sway bars

- Rear subframe bushes replaced with Noltec items

- Cusco brake master cylinder stopper

- Cusco Strut Brace

- HICAS Lock Bar

All suspension work carried out by Chris at Centreline suspension. All receipts available.

Appearance

- Full bare metal respray

- 18x9.5 BBS LM with 265x35x18 f/r tyres

- Tinted Windows

- D-Speed Clear Front Indicators

- Genuine Nissan bumper bar (not fibreglass) with N1 intercooler vents added

Interior

- Custom full leather interior and door trims.

- Custom 3 pod holder with Defi Boost, Water and Oil Temp Gauges. Defi controller.

- Nismo guage cluster

- Transfer case variable torque controller from Duncan on SAU.

- Alpine CD player

- Sony XPlod amp

- Pioneer mids and splits up front

- Soundstream 6” in the standard rear location (no metal was cut)

- 12” Pioneer sub box

- Viper car alarm with pager

This car has been built with quality parts with no expense spared so that it can be driven with the A/C on cruising on a nice warm day or you can take it out on the track or drag race it and pull respectable times.

I’ve owned the car for 5 years. It’s garaged and driven on weekends occasionally if the weather is nice.

Reason for selling is that I would like the cash for other ventures.

Not desperate to sell at all but if I get what I want then I am happy to let it go to a good home.

Happy to discuss more with serious buyers only.

Located in Melbourne.

Price: $37,000

Contact: Archie 0419 714444

Will consider trade with non turbo vehicle up to $10k.

post-9042-1261437598_thumb.jpg

post-9042-1261437625_thumb.jpg

post-9042-1261437634_thumb.jpg

post-9042-1261437647_thumb.jpg

post-9042-1261438092_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/301023-1993-r32-gtr-silver-vic/
Share on other sites

wow that seems like drug money for an R32 GTR

How about you look at every sale of the same model car on a case by case basis rather than assuming that if it's model X then it should be $X?

For eg how about I

- put my standard GTR brakes back on and sell my Alcons

- put in the standard interior and sell my leather interior

- put my standard diff back in and sell the Nismo one

- put R34 GTR rims on and sell off the BBS LM's

- etc

I can then drop the price to say around $30k and then perhaps you can compare it to other clean looking 32 GTR's with built motors, otherwise your comment isn't fair.

Besides I didn't even mention all the mods on the car in the ad anyway like the Nismo AFM's i have on and other small things that others would post like ARC oil cap, Cusco radiator air guide, Greddy metal radiator elbow etc etc

But i really don't want to 'bits' the car and would like to think someone can appreciate it with all the niceties it has.

Anyway as i said I'm not desperate to sell at all but if I get what I want then I am happy to let it go to a good home.

wow that seems like drug money for an R32 GTR

gunt,

I know you're looking out for one yourself (from previous threads) but what are you comparing archie's example with?

free bump very nice car.

WOW, one of the cleanest and well modded 32 GTR's in Aus. I can definetly vouch for this car, it looks like new and can pull some very respectable times on the track.

Good luck with the sale Archie, but I hope you keep it!!!!

gunt,

I know you're looking out for one yourself (from previous threads) but what are you comparing archie's example with?

free bump very nice car.

well....what with the warning and all I am pretty sure I cannot comment.

Not that I was actually PM'ed or emailed that warning - I only saw that warning because I wanted to look at how this sexy looking GTR was going (whilst rabidly checking all sales) and saw the warning with an admin/modifier label attached....

note to to admins/modifiers - possible improvement to process! - maybe include an email for stupid mofos like me on these warnings (besides a msg in that particular thread) and reasons why - it will probably help reduce our numbers.

hopefully this post doesn't violate some aussiesklyine forum free speech ruling either.

Worst case at least it's a free bump.

Additional - would be great to know some tracktimes for this car around VIC raceways (as per JagR33's comment re respectable track times) if that can be provided? ( and yes understand how the driver makes a difference)

Edited by Gunt69
Additional - would be great to know some tracktimes for this car around VIC raceways (as per JagR33's comment re respectable track times) if that can be provided? ( and yes understand how the driver makes a difference)

Not sure on exact track times but this car is very similar to another forum member's car (BBGTR). Built almost identical to BBGTR's R32GT-R and you can check out his member profile for times...

Click here http://www.skylinesaustralia.com/forums/BBGTR-m21259.html

Now I'm not saying the car above has done the exact same times but if Archie was a frequent track junkie (like BBGTR) they would be on par with eachother...

Hope that helps....

Car was bought as a single turbo setup back in 2004 and with this set up it did:

Calder 1.04

Phillip Island 1.51

Sandown 1.23

Converted back to twin set up in late 2007

Winton 1.37

Engine rebuilt mid 2008

Sandown 1.23 (damp track surface and hardly pushing it)

No track days in 2009 as i was saving coin for my overseas trip. Car garaged, hooked up to the battery trickle charger and hardly driven. Still took it in for servicing and got things fitted like the Nismo diff because i have a sickness and enjoy spending money on my car. :)

1993 NISSAN R32 SKYLINE GTR - SILVER

Engine

- Racepace Stage 1 (all the usual oil gallery mods, head cleaned up with new guides, shims, valves etc, new 33GTR crank, forged pistons, block chemically cleaned, deburred, decked, honed etc etc)

- Garrett 2860-5 turbo's

- X-force dump pipes

- Custom 3.5" Exhaust

- APEXi Power FC

- 700cc Injectors

- Bosch Motorsport 044 Fuel Pump

- Splitfire coil packs

- ARC 106mm Front Mount Intercooler

- Custom Racepace oil cooler with metal ducting

- Custom Racepace catch can

- Remote oil filter kit

- JJR 40mm aluminium radiator

Engine and turbo's have done approximately 10,000kms. All mechanical work performed by Racepace since I bought the car so all history can be verified on their database. Have receipts too. No expense was spared ie whatever Ben suggested should be done was done no questions asked. Touch up tune by Ben on 1/11/09 for a safe 377rwkw on 98 octane.

Drivetrain

- 33 GTR 5 speed manual

- Exedy Twin Plate Clutch

- Nismo GT LSD Pro 1.5way (5000kms old)

Suspension & Brakes

- Alcon 6 pot 365mm fronts. Standard rears with DBA4000 slotted rotors.

- Braided brake lines all round (ADR approved)

- Jap spec coilovers (Racepace replaced my old Teins with these ones however not sure what brand. Will have to jack car up and have a look)

- Custom upper arms and castor rods from Centreline suspension

- Whiteline adjustable front and rear sway bars

- Rear subframe bushes replaced with Noltec items

- Cusco brake master cylinder stopper

- Cusco Strut Brace

- HICAS Lock Bar

All suspension work carried out by Chris at Centreline suspension. All receipts available.

Appearance

- Full bare metal respray

- 18x9.5 BBS LM with 265x35x18 f/r tyres

- Tinted Windows

- D-Speed Clear Front Indicators

- Genuine Nissan bumper bar (not fibreglass) with N1 intercooler vents added

Interior

- Custom full leather interior and door trims.

- Custom 3 pod holder with Defi Boost, Water and Oil Temp Gauges. Defi controller.

- Nismo guage cluster

- Transfer case variable torque controller from Duncan on SAU.

- Alpine CD player

- Sony XPlod amp

- Pioneer mids and splits up front

- Soundstream 6" in the standard rear location (no metal was cut)

- 12" Pioneer sub box

- Viper car alarm with pager

This car has been built with quality parts with no expense spared so that it can be driven with the A/C on cruising on a nice warm day or you can take it out on the track or drag race it and pull respectable times.

I've owned the car for 5 years. It's garaged and driven on weekends occasionally if the weather is nice.

Reason for selling is that I would like the cash for other ventures.

Not desperate to sell at all but if I get what I want then I am happy to let it go to a good home.

Happy to discuss more with serious buyers only.

Located in Melbourne.

Price: $37,000

Contact: Archie 0419 714444

Will consider trade with non turbo vehicle up to $10k.

hey archie, look i know you dnt really want to part out but i also have a maticulous r32 gtr just imported 4.5 grade lol and i will almost do anything for those rimsthere amzing are you interested in a swap for rims plus money on top ill send you some flics if you want.nice car mate and i totally understand your price my car cost me a fortune to import. its really crap how theres so many gtr's in australia that devaluate cars like ours.

  • 2 weeks later...
Not sure on exact track times but this car is very similar to another forum member's car (BBGTR). Built almost identical to BBGTR's R32GT-R and you can check out his member profile for times...

Click here http://www.skylinesaustralia.com/forums/BBGTR-m21259.html

Now I'm not saying the car above has done the exact same times but if Archie was a frequent track junkie (like BBGTR) they would be on par with eachother...

Hope that helps....

Archie, shame to see it go, it's the only other 32 in Vic that I would put up against mine for workmanship and attention to detail. They don't come much better.

To add some addtional comments on the reliability of this setup, I have not opened my bonnet between services except to let it cool at the track for over 10,000k's and that includes 16 track days over the last 18 months. My engine was built at the same time as Archies.

Regards

Andrew

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah. OK. I'll say the same thing I say to everyone. You do not have to use 100% throttle all the time.
    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
×
×
  • Create New...