Jump to content
SAU Community

R33 Parts. Front Bars, Coil Packs, Bov, Seat Belts, Throttle Bodies, Rims Stock R33 And 4stud Aftermarket

KaiShin
 Share

Recommended Posts

  • 2 weeks later...
KaiShin Enthusiast

KaiShin

Posted
  • Author
Posted

Stock Front Bar R33 (no reo): SOLD

Stock Rear Bar R33: $70

Fibreglass Front Bar M-Spec like (no reo): - SOLD

Stock BOV and crossover pipe: $10

Stock front seat belts: $15 each

Stock intake plenum: $40

Stock R33 Throttle Body: $10

Stock 240sx Throttle Body: $10

Stock series1 coils: SOLD

Stock R33 rims set of 4 (2 have very poor rubber on them and 2 without rubber) : $90 set

Set of 4 stud 114.3 rims set of 4 with rubber: $300 set - will suit 180sx/silvia etc.

Stock bonnet with hole cut in it: $20

Aftermarket fiberglass bonnet: $130

Prices negotiable and postage at purchasers expense.

Post a reply, private message, email to [email protected] or ring/sms on 0423 051 961.

Cheers

Link to comment
Share on other sites
KaiShin Enthusiast

KaiShin

Posted
  • Author
Posted

Stock Front Bar R33 (no reo): SOLD

Stock Rear Bar R33: $50 (PRICE DROP FROM $70)

Fibreglass Front Bar M-Spec like (no reo): - SOLD

Stock BOV and crossover pipe: $10

Stock front seat belts: $15 each

Stock intake plenum: $30 (PRICE DROP FROM $40)

Stock R33 Throttle Body: $10

Stock 240sx Throttle Body: $10

Stock series1 coils: SOLD

Stock R33 rims set of 4 (2 have very poor rubber on them and 2 without rubber) : $75 set (PRICE DROP FROM $90)

Set of 4 stud 114.3 rims set of 4 with rubber: $300 set - will suit 180sx/silvia etc. (Rubber and wheel weigh 16kg each)

Stock bonnet with hole cut in it: $20

Aftermarket fiberglass bonnet: $100 (PRICE DROP FROM $130)

Prices negotiable and postage at purchasers expense.

Location of items Petrie, Brisbane, QLD 4502

Post a reply, private message, email to [email protected] or ring/sms on 0423 051 961.

Cheers

Link to comment
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted

Stock BOV and crossover pipe: $10

Stock R33 Throttle Body: $10

Stock 240sx Throttle Body: $10

I'll take the above. Have money here ready to go

I'll pass on the rims, found some 15's that are 14kg each with tread

send details to

[email protected] (i can access this email at work and do funds transferrs etc)

Link to comment
Share on other sites
KaiShin Enthusiast

KaiShin

Posted
  • Author
Posted

Stock Front Bar R33 (no reo): SOLD

Stock Rear Bar R33: $50

Fibreglass Front Bar M-Spec like (no reo): - SOLD

Stock BOV and crossover pipe: SOLD pending payment

Stock front seat belts: $15 each

Stock intake plenum: $30

Stock R33 Throttle Body: SOLD pending payment

Stock 240sx Throttle Body: SOLD pending payment

Stock series1 coils: SOLD

Stock R33 rims set of 4 (2 have very poor rubber on them and 2 without rubber) : $75 set (PRICE DROP FROM $90)

Set of 4 stud 114.3 rims set of 4 with rubber: $300 set - will suit 180sx/silvia etc. (Rubber and wheel weigh 16kg each)

Stock bonnet with hole cut in it: $20

Aftermarket fiberglass bonnet: $100

Prices negotiable and postage at purchasers expense.

Location of items Petrie, Brisbane, QLD 4502

Post a reply, private message, email to [email protected] or ring/sms on 0423 051 961.

Cheers

Link to comment
Share on other sites
  • 2 weeks later...
KaiShin Enthusiast

KaiShin

Posted
  • Author
Posted

Stock Front Bar R33 (no reo): SOLD

Stock Rear Bar R33: $50

Fibreglass Front Bar M-Spec like (no reo): - SOLD

Stock BOV and crossover pipe: $10

Stock front seat belts: $15 each

Stock intake plenum: $30

Stock R33 Throttle Body: $10

Stock 240sx Throttle Body: $10

Stock series1 coils: SOLD

Stock R33 rims set of 4 (2 have very poor rubber on them and 2 without rubber) : $75 set (PRICE DROP FROM $90)

Set of 4 stud 114.3 rims set of 4 with rubber: $300 set - will suit 180sx/silvia etc. (Rubber and wheel weigh 16kg each)

Stock bonnet with hole cut in it: $20

Aftermarket fiberglass bonnet: $100

Prices negotiable and postage at purchasers expense.

Location of items Petrie, Brisbane, QLD 4502

Post a reply, private message, email to [email protected] or ring/sms on 0423 051 961.

Cheers

Link to comment
Share on other sites
KaiShin Enthusiast

KaiShin

Posted
  • Author
Posted

Stock Front Bar R33 (no reo): SOLD

Stock Rear Bar R33: $50

Fibreglass Front Bar M-Spec like (no reo): - SOLD

Stock BOV and crossover pipe: SOLD

Stock front seat belts: $15 each

Stock intake plenum: $30

Stock R33 Throttle Body: SOLD

Stock 240sx Throttle Body: SOLD

Stock series1 coils: SOLD

Stock R33 rims set of 4 (2 have very poor rubber on them and 2 without rubber) : $75 set (PRICE DROP FROM $90)

Set of 4 stud 114.3 rims set of 4 with rubber: $300 set - will suit 180sx/silvia etc. (Rubber and wheel weigh 16kg each)

Stock bonnet with hole cut in it: $20

Aftermarket fiberglass bonnet: $100

Prices negotiable and postage at purchasers expense.

Location of items Petrie, Brisbane, QLD 4502

Post a reply, private message, email to [email protected] or ring/sms on 0423 051 961.

Cheers

Link to comment
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • niZmO_Man
      R32gtst rear wheel bearing

      By niZmO_Man · Posted

      Remember, your car is 30+ years old now, and who knows what drifters from the 90 in Japan + whoever had the car over the years have done to your car (before trying to return the car to "stock" condition and auctioning it out of Japan + whatever's been done afterwards). Always pull the parts in question out, measure and investigate. A lot of stuff can be sub'd out (on 90's Nissans and Toyotas), so as a general rule of thumb, pull out and measure then investigate.
    • niZmO_Man
      Got this r31 silhouette flood car to rebuild.

      By niZmO_Man · Posted

      sorry to be pedantic about this, but I'd love to see more details about this. Background: I'm a retrofitter, and when I get off my lazy arse, I have a projector pair and a brick pair to retrofit (with either HID or LED projectors).
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Once an R-chassis-er, always an R-chassis-er. We just try to look for alternatives, which never fills the void in our hearts.
    • niZmO_Man
      Synthetic oil versus conventional oil

      By niZmO_Man · Posted

      Mate, you think that's bad. I drained the oil from my cousin's daily (she needs it to get to work, a nurse). Only after dumping the oil did I realise that the sump plug was stripped and would not get out of the pan. Thankfully Accord group Syd on Facebook had a guy nearbuy with a K-whatever sump on hand, super duper lucky. Swapped the pan and had her car going within 24hr. bloody hell, learnt my lesson. Always check all fasteners before starting a job.
    • niZmO_Man
      Supra back in V8 Supercars

      By niZmO_Man · Posted

      Nissan can get back in, they already spent money developing the Altima, so the 400Z should be a breeze  
×
×
  • Create New...