Jump to content
SAU Community

Recommended Posts

Hello, im new and am on the English skyline owners but since I own an A31 I thot id broaden my horizens!

Im 20 and from Ireland training as a mechanic!

Here is my car and spec, Happy Christmas all!!

Details - 1989 Cefiro 5 speed 2500cc 100,000klm The engine is a complete swap. The RB25 DET engine and transmission came from a R33 Skyline. The timing belts and water pump have been replaced. Full pearl white re-spray. x3 Boost and Temp Gauges Spin Turn Hand Brake Turbo Timer Bride Semi Bucket Seat URAS full aero kit Clear Indicators Front Tower Bar Apexi Air Cleaner URAS Lower Arms KAAZ 2 way Diff Tein Coil Over Suspension Stainless Straight Pipe 5 stud hub conversion Skyline Type M Brakes HID Lights3" turbo elbow

3"downpipe

3"de-cat

3" apexi cat back exhaust

Large FMIC

All of this was put to good use and mapped to 336.9 bhp

Let me know what you's think. I'm on the lookout for rearseats btw so if u kno of any let me know!!

post-69377-1261668319_thumb.jpg

post-69377-1261668344_thumb.jpg

post-69377-1261668375_thumb.jpg

post-69377-1261668401_thumb.jpg

post-69377-1261668436_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/
Share on other sites

  ariandy said:
nice ceffy you got there!

can you post your engine bay pics?

Will take some and post up when the weather gets better, its been lashing rain for the last two days!!

As for the wheel hubs they are from an R33 Gts-t Type M!!

Lum I recognise you too, If i remember correctly ur driving an AWD Cefiro!?

Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/#findComment-5010227
Share on other sites

  Lum said:
That's the one yes. As far as I can tell it's the only 4WD Ceffy in the UK. Short of getting access to the DVLA database I have no way of knowing for sure though.

U not gagging to make it just RWD, some yoke for drifting like!!

Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/#findComment-5014750
Share on other sites

Nope. I bought it to be a daily driver. Specifically went for 4WD and Auto to avoid one that had been used for drifting. It's in good nick and I want to keep it that way. I can use my Volvo 940 for drifting instead :P

I believe it's a pain in the arse to convert them to RWD, hence why the Skyline people would rather get a GTSt and swap in an RB26 than get a GTR and make it RWD. I guess in the meantime I could just pull the 4WD controller fuse though :)

Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/#findComment-5014755
Share on other sites

  PeterT said:
i got seats out of a 4 door r32 for mine! went in grand, tiiiiiny bit too short but meh.

wherd you pick this up from, and how much if you dont mind me asking??

im in wicklow!

Ah great stuff will try get those seats!!

I imported it myself from Japan, did a levin a year or two ago and was good so went back to same company and bought this, 5,200 on the road!!

All NCT, tax, mapping paid for, thats a bargain for 336.7 bhp and the conversion is a very pro job, brakes and all!!

I posted this somewhere else but are u the blue cefiro I sometimes see in the city centre near Aungier st DIT college!?

Just saw urs Peter, VERY VERY NICE!!

Another one in Ireland, only 4 in the country as far as I know!!

How long u have it and how much it cost u?? And what power u putting down? RB20det yea?

Edited by Cefiro Panch
Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/#findComment-5018243
Share on other sites

  Cefiro Panch said:
Ah great stuff will try get those seats!!

I imported it myself from Japan, did a levin a year or two ago and was good so went back to same company and bought this, 5,200 on the road!!

All NCT, tax, mapping paid for, thats a bargain for 336.7 bhp and the conversion is a very pro job, brakes and all!!

I posted this somewhere else but are u the blue cefiro I sometimes see in the city centre near Aungier st DIT college!?

Just saw urs Peter, VERY VERY NICE!!

Another one in Ireland, only 4 in the country as far as I know!!

How long u have it and how much it cost u?? And what power u putting down? RB20det yea?

i had mine on the road for 4500! ha. but thats a nice power figure, mines standard enough rb20 yeh. i used to be in bolton st, had it in there a couple times!

good few of them around, i can think of our 2 and about 4 others off the top of my head! go join driftireland.com there!

Link to comment
https://www.sau.com.au/forums/topic/301380-introduction/#findComment-5018762
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • On the compressor side it looks like the best, if your head setup will support doing 100-110lb/min at 30psi-ish boost.   The G45-1350 compressor looks ideally better if you need closer to 40psi for it, given both the G40 1150 and G42 1200 look like they'll be around the 100lb/min mark at 35psi and dropping from there.   Bear in mind the turbine sides are all different between those three turbos, so that COULD be an influencing factor for how they all perform in the real world as well.   Not sure if you've made a conscious decision to only look at Garrett or not, but at least on paper the XRE7169S matches or beats those other three at everything from 30psi up and just going from wheel size alone likely to be at least as responsive as the G40 1150 and seem to behave closer to G42s in terms of turbine flow.
    • @Lithium  looking for a turbo for my Rb30. Want to make sure I understand this correctly.   If I want to stay 40psi or under my best choice of these 3 is actually the smaller G40-1150 ?
    • Massive ups for MTHire also. Could not have done the subframe bushings job without hiring the tool from them. Process was super easy and cost me around 25% of the cost of the tool. If you need a one-time tool to do something, check them out. (Paid for the rental myself, no sponsorship here.)  
    • I'd suggest calling Unigroup, they have a lot of experience with these, access to reliable fabricators etc. Of course it will cost but at least you can trust what they tell you
×
×
  • Create New...