Jump to content
SAU Community

Recommended Posts

^^^ What he said.

Mine did (more due to unsecured speaker) and it dead shorted the battery. I had just come to a stop on a 100km/h highway at a red light. In the Right lane... with no hazards.. no tail lights... no brake lights... at 10.30pm.. :) Very scary.

Edited by gotRICE?
yer i was looking for a set up that didn't need a sub, still want a decent amount of bass tho, just not sure if i really want a sub. whats the best way around the bass with out a sub?

get some good 6x9s in the rear, components in the front and a 4 channel amp.

Problem solved.

I'm not really keen on subs for skylines, plus i don't want the added weight.

ill be getting a new headunit and some 6x9s for my 33 soon too so get some pics once you've done it as im keen to see how it goes.

I have alpine type S all round 6.5" coaxial in the front and 6x9 in the back run off a 4 channel which sits hidden under the passenger seat ( i like my limited boot space). Had to cut bigger holes in the parcel shelf and mount them on spacers to clear the battery. Finished off the doors with dynamat and dynamat and dynaliner under the rear seats. Sounds awesome for entry level speakers, great well rounded sound when amped and no real need for a sub :rofl:

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • careful when running the car after a boil over. Ive heard you can lose enough coolant that it won't show the right temps because of too much air in the system (or something like that). Make sure the levels are good before trying again.  Maybe a mobile mechanic can come have a look with their scan tool ?
    • OK, just for some extra clarity - there is more than one option at Frenchy's. 1. You can buy the whole kit - with or without the actual compressor. The whole kit includes mounts, hoses, condensor, etc. That's either ~$2200 or ~$2800. No surgery required with this option. 2. You can buy just the bracket (~$600), or the bracket with the compressor (~$1200). Either of this or the above option "without the compressor" is if you already have an Echo comp or you are able to source one locally. Whatever the case, in this option, you will need surgery done on your hoses to adapt to the new compressor. When I said "the Frenchy's kit", I meant the whole kit in option 1. It is obviously somewhat more $$ than a $1500 OEM compressor. But if I had to spend $1500 on an OEM compressor, I would certainly consider spending double that to renew and significantly update everything forward of the firewall. Another option is to rebuild your original compressor. My R34 comp is currently dead and I will be most likely doing that to it if the spare one in the shed is also leaky.
    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
×
×
  • Create New...