Jump to content
SAU Community

F\s Show 93 S2 Gtst Mspec R32. 19s Cream Leather


Recommended Posts

s2 gtst mspec r32

turbo

full exhaust sounds very nice

5 speed

pearl orange red

cream leather interior

bov

side mount intercooler

heavy duty clutch

springs

dvd

alpine s

boost gauge

oil,

volts,

air fuel gauges

new 20s

new tyres

165kms

sunroof

electric windows

racing leather wheel

very very clean

.

$13,500. ono

swaps 14g 0430 828859

post-68974-1261804513_thumb.jpg

post-68974-1261804537_thumb.jpg

post-68974-1261805189_thumb.jpg

post-68974-1261805209_thumb.jpg

Edited by katurbo
6k bring ur own wheels and seats..

and ur girlfriend . and its yours..

untill then gl finding a cleaner , meaner, mspec r32..

right.

explain how it's mean?

and explain how white leather STOCK SEATS make's it worth more?

is it actually leather retrim or is it the leatherette seat covers what you can buy?

correct me is I'm wrong, but what you have there is

a stock R32 gtst with a respray, re trimmed seats (maybe), lowered springs (stock shocks), and an exhaust.

All with 165,000kms.

basically, it's a stocker with high km's.

I'm sure your wheels are worth a bit (to you) so a stock R32 with no wheels, $6K is plenty.

if you want to keep your leatherette seat covers, I'm more than happy to bring my own seats.

right.

explain how it's mean?

and explain how white leather STOCK SEATS make's it worth more?

is it actually leather retrim or is it the leatherette seat covers what you can buy?

correct me is I'm wrong, but what you have there is

a stock R32 gtst with a respray, re trimmed seats (maybe), lowered springs (stock shocks), and an exhaust.

All with 165,000kms.

basically, it's a stocker with high km's.

I'm sure your wheels are worth a bit (to you) so a stock R32 with no wheels, $6K is plenty.

if you want to keep your leatherette seat covers, I'm more than happy to bring my own seats.

you dont have to buy it, nothing worth postin dont post. :thumbsup:

not seat covers at all

.

as i said bring own seats and wheels and your girlfreind its yours for 6k...

untill then dont waste my time.

coils

paint

real leather..

wheels

cost me 11g.. aint really stock

not adding

heavy duty clutch

r33 box

exhaust

bov, all gauges

ect....

its immaculate not a scratch

Edited by katurbo

sweet.

what is the part number on the R33 box so I can confirm it is an R33 one.

did you have to change the R32 tail shaft to fit the R33 box?

when you say "coils" do you mean aftermarket coilovers? or are you refering to lowered springs? or do you mean the coil packs?

Where should I bring, seats, wheels and girlfriend and $6K to to buy your car?

Also, was the engine bay and door jams painted?

any engine bay pics? My girlfriend wants to make sure that it's worth being traded for.

Edited by GTST
any engine bay pics?

just search his 11tybillion sale threads... that go nowhere. strange he never sells anything.

good luck on your quest.

as peter chow says.

1. make sandwich

2. suck dick on command

3. not talk so much

if she don't meet all 3 id trade.

LOL :D

post-a260826-IMG-0086.JPG



  • Similar Content

  • Latest Posts

    • I'm on the AD09, strictly on the street. They are a very nice tyre, have done ~16k km and are near the end, might make it to 20. They are, in my opinion, very much just a street tyre. I wouldn't expect them to be equivalent to some of the others in your list on the track. Although I'd be pleasantly willing to be surprised. My memory of the AD08Rs is vague enough, due to the passage of time, that I shouldn't try to compare them, but I feel as if the AD09 is not quite as "sporty" as the AD08R was.
    • There's a difference between "selling" a product to someone (which, if you walked into a workshop or bricks and mortar store and bought and walked out with it, is just the act of buying and selling) and rolling your buggy into a workshop and having them fit non-roadworthy stuff to the car. And for the latter, let's ignore any potential legal loophole arguments that the armchair lawyer might want to make to differentiate between supplying your own parts to be fit by the workshop or getting the shop to supply and fit. The workshops that have been dealt with in the US for this are in the latter category. It would be near impossible to try to charge/attack/criminalise a shop for selling "for off road use only" parts to someone unless those things were intrinsically illegal in their own right, or had other legislation wrapped around them, such as there is for guns, pharmaceuticals, etc. Well, no. And you knew your argument was silly when you made it. And there is. it might be somewhat harder in Vic, but then that's the price you pay for electing the long list of (unts that you have to run the whole shit hole**. But otherwise, you can put an aftermarket or otherwise tunable ECU into a car and get it run through the whole shebang of emissions testing as part of an engineering cert and, so long as the tune is "locked" afterwards, then that modification is on the list that is approved on the cert. But....it is an expensive process. ** Of course, the (unts who make up a large proportion of the population that eternally try to get around the rules are also a part of the problem and the reason that you end up with draconian rules in the first place. By contrast, SA was founded and the government and civil service set up and run by very sensible types (largely German) who set up good structures that enabled a lighter touch of government on the somewhat better behaved population. it is only more recently that we have followed the rest of Australia down the criminal drainhole of penal colony behaviour and now we have to catch up with mobile phone cameras and so on.  
    • Not specifically the revamp Toyos. In the past I've used Nitto NT01s, which were essentially the same compound as R888 with a different pattern (that's what the internetz said, so just be facts). I did like the NT01, progressive fade, didn't go from grip to 0 grip in a split second. If you look at the serious street/track guys, most are either on Cup 2, A052, A050, AD09, CR-S or AR-1.  
    • I have one of these! It is absolutely useless. It provides not nearly enough force on the bolt, it just slips over anything that is not finger tight. And if it's finger tight, you can use your fingers.
    • You have to take photos of the car in Victoria with a timestamp. So if you have big aftermarket turbo in your engine bay, your car is simply not getting a RWC and you'll be doing a lot of returning to stock, and re-modding after about 90 days (because cars that have had a RWC can be audited after the fact). The law I'm kinda ambivalent about. I can see the logic and the writing on the wall, Cobb etc would be well known for selling to 'wink wink off the street usage' but in the real world everyone knows what they do and where they end up. It'd be like someone selling guns in Australia but "only to people who have a proper licence" but selling them outside of Bunnings instead of sausages to anybody. Like RWC's, and VASS's and EPA, this is enforcement of the actual existing rules. I haven't looked into it but there (should) be a way for people to legally pass their tuned car to be within the rules if they can prove they pass emissions laws that are applicable. If there's not then that's another story.
×
×
  • Create New...