Jump to content
SAU Community

Recommended Posts

hey ppls just got given a brand new turbo XS BOV

just wanted to know do you put it in place of your standard bypass valve

or on the turbo to intercooler pipe (already has outlet to fit BOV on pipe)

oh yeh on a R32 GTS-4

Link to comment
https://www.sau.com.au/forums/topic/301592-where-to-put-bov/
Share on other sites

hey ppls just got given a brand new turbo XS BOV

just wanted to know do you put it in place of your standard bypass valve

or on the turbo to intercooler pipe (already has outlet to fit BOV on pipe)

oh yeh on a R32 GTS-4

2 places you can put it.

- In the Xmas returns list

OR remove your factory bov. (Should just be able to unbolt) Then bolt the new one in the same place. If it is a recirculating bov then reconnect the hose that goes from the bov then reenters near the turbo. If it is atmospheric then just block that hose off.

just thought it'd be more beneficial to have it as close to the turbo as possible.

why?

closer to the intake plenum is where you want it, airflow going in the one direction.

that said, i have my BOV's before the cooler without much of a drama (had it post cooler before hand, cant notice a difference).

but im with everyone else - go the stock BOV!

Hence i said "not quite correct". If you get a good one they can be fine, however 9/10 times they aren't, just like you said with the factory coil packs and other parts, most are f**ked after 15 years. Personally i'm impressed that Hamish's holds boost to redline at 20psi. Nearly all the ones i've come across start opening up and tappering off boost at high rpm.

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...