Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

The 550ft time shows easy 10s and this thing has a wild topend so things were only going to get faster.

This car made 580rwhp@ only21psi and mild timing because it still has a stock gearbox but remember that 580rwhp is at least 640 to 660 on the APA dyno.We have boost in every gear inc 1st and about 12psi more boost and 5 deg more timing to use when the box go's in.

I garranty this is currently the fastest GTR in Perth as no other GTR has as broad power band and the best part is Ant built it in his Back yard.

Yes we will prove this asap.

11.47 on factory inturnals was a great effort when huge dollar shop specials only went 2/10s faster but thats history now wait for the new year when Ant and Danny are in full flight.Ants car is not as big dollar as people want to think but is well thought out and sensible parts brought inc the Wolf plugin ECU that worked out of the box with no problems with out needing CDI and Spitfire coils etc.

Good to see an R33 GTS run 12.3 on wed night with 306rwhp on good rubber.

This car was only a 25/40 bolton turbo, Wolf plugin ECU, intercooler + exhaust.

Can't wait to see ND4SPD run now it has 280hp more than this GTS at only 21psi and soft timing,we have left it soft because we have to race Tango1 on tuesday at the plex and didn't want to upset the commish of police.Then we can put good fuel in and crankit up.580 is the highest power run by a GTR on a Shootout accredited dyno in WA sofar!

Cant wait to head down with the slicks steve. If they ran 12.3 with 306hp we should run high 11's with my setup :D

high 11's  

low chances

and dont 33's only weigh like 1400kg dont go complaining about weight till you got 1700kg + driver soarer to tug around town  

i got 299hp and will be lucky to see 13.5 with happy go lucky single wheeler diff and nice stock auto

Mate they ran a 12.3 with a 306hp r33, sorry 1400kg whale, last I looked I have the same 1400kg whale but with 339hp. Sorry to hear about your auto box... cant you drive a manual?

Its easy to run 11s on the forums.My car runs 13.2 with 340hp.Im sure it would go quicker with 280hp and a broader power band.That is my turbo is big enough to spin a dyno but on the track lag is killing me.

Maybe i need 3 feet too Bogrolls!!!!

Gimme the keys dude. :thumbsup: Some driver brutality will have that running 12's with a doddle. And lag ?? You aint changin gears quick enough .

Mate they ran a 12.3 with a 306hp r33, sorry 1400kg whale, last I looked I have the same 1400kg whale but with 339hp. Sorry to hear about your auto box... cant you drive a manual?

I forgot to mention though that the 12.3 was done with a driver that actually knows how to drive. Sorry but that rules out 90% of r33 drivers.

Its easy to run 11s on the forums.My car runs 13.2 with 340hp.Im sure it would go quicker with 280hp and a broader power band.That is my turbo is big enough to spin a dyno but on the track lag is killing me.

Maybe i need 3 feet too Bogrolls!!!!

Simple - less smiling more anger :D

John id be amazed if you did a 13.5 - the cars got more then a 13.5 in it - lean her out some more and go for it .

oh ive been leaning it out baby not much more but a little reset the ecu and its going much harder now

now remember kids ping is power.

i weighed bens XD falcon in wangara yesterday and actually thought "i wish my car was as light as his"

(a jenny craig inspiring 1520 less driver)

might rip some shit out of mine and plex it in the new year

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...