Jump to content
SAU Community

Recommended Posts

Thanks guys glad you liked it.

Im trying to stop it from drifting, drifting slows you down. Unfortunatlly its natural for the s14a to want to slide, its hard to dial it out.

Its important to know that we have to have a 36mm intake restrictor on the turbo, this restricts hp to about 300 - 320 rwhp

Its not an overly large list but here is a couple of items:

Engine

Forged 2ltr, Cams, Liners, 6 boost, 2871R, injectors, E85 Race fuel.

Gearbox

RB25 with twin plate OS Clutch

Diff

Locked

Brakes

Front 6 piston Wilwood calipers with Wilwood 340mm rotors and alloy hats

Rear 4 Piston Wilwood caipers with Wilwood 310mm rotors and alloy hats

Ferodo Racing pads

17 x9 Enkie RPF-1

255/40/17 Yokohama A048 R compond tyres (controlled tyres, we must use the A048)

Pic

http://www.pbase.com/barnsie01/image/118506207

http://www.ipraforum.com.au/download/file....6&mode=view

Pfffff looks like shit compared to grahams!

Just kidding :D Awesome driving squire. Dare I ask either steve or ash.. what power does it make without the use of that restrictor?

Was that "fluid on the circuit" because of the commodore on the lap before you pulled the skid? VE started smoking around cat.

Agreed though that you make it look effortless. I suppose that's because the mirror doesn't show your face with your eyes popping out hahaha.

Whens the next one so I can finally make the trip out to watch!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...