Jump to content
SAU Community

Recommended Posts

Hey guys,

Just a quick question. I've been looking around at rims and am wondering how effective high quality tyres can be on narrow rims. I notice on websites like tempetyres, stgeorgetyres, etc that most of the rims are like 7.5-8.5" wide. A lot of the JDM wheels I like too are ridiculously expensive at the wider widths.

This doesn't phase me too much as a) the rims are cheaper and b) the tyres will be cheaper.

Will narrow high quality tyres out perform cheap to average wider tyres?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/
Share on other sites

wider tyre is more grip more stable not to mention how sh!t such narrow rims would look on a supra. decent rubber is not that expensive if you hunt around the kumho's are quite popular and i believe are very good ku36? someone else will have more info than me though.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5009790
Share on other sites

wider tyre is more grip more stable not to mention how sh!t such narrow rims would look on a supra. decent rubber is not that expensive if you hunt around the kumho's are quite popular and i believe are very good ku36? someone else will have more info than me though.

I love my KU36's. wet I have had no issues and done prob 500kms in serious rain, more again in damp. In the dry they are great.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5009837
Share on other sites

ok, you can get cheaper rims that are wide.... for a supra i'd look at lenso d2r....

as for tyres, i run a narrow tyre for my power figure, but i run nitto NT05's in 245 they are around $500 a corner retail (clearly i dont pay this), so not cheap, but grippy as all f**k...

with 300rwkw, low low low on stiff coilovers, camber, pineapples and a mech diff my 245's are insanely grippy

send me a pm kez and i can get you some good prices... :/

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5010371
Share on other sites

Will narrow high quality tyres out perform cheap to average wider tyres?

Yes. All else being equal, the width of the tyre is irrelevant to the size of the contact patch. All that changes is the shape. This can have a marginal effect on traction, but not to the same extent that a superior tyre type will.

When I went from 245 width all round RT215 S-Comps all round to 255 front / 285 rear width FK452s I noticed a big drop in grip. Even after mentally telling myself to go easier on the brakes, I'd get the tail to step out while trail braking. And I used to run 235 width R-Comps and, when hot, they had more grip again.

If you can afford to run a softer tyre that wears out more quickly by going to a narrower width (and even a lower wheel diameter), then on purely performance reasons I'd suggest it. But, aesthetically, it wouldn't look that crash hot. And, if you're talking about wheels you use every day, how they look will be a factor.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5011494
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...