Jump to content
SAU Community

Recommended Posts

  • 3 months later...
  • 9 months later...

so i did this today...pretty easy only had 1 bolt in it...maybe its been done before.....pulled it apart and there is only 4-5 teeth left on the little cog...made it work put it together and its doesn't click now...which is great, but the vents still dont work, I have feet and i think half a windscreen the passenger side which is useless to me really......no dash vents at all.....the vent arm is moving with the motor and all but nothing changes...:unsure:

Gah. So a year ago I swapped out the mixer, and now its stuffed again. The temperature is pretty much stuck on 32 degrees, which I speculated was the mixer, but the noise seems to happen when I select different modes (feet/face).

I tried this method today, popped the condenser unit down about 1cm, but I just can't get my hand in there to do anything. I can just barely touch the top bolt with my finger with the steel bar and airbag in the way. =-/

  • 2 months later...

Update: After removing the vent pipe, then the stereo and facia surround etc etc, there was still no way of getting to the actuator so I ended up removing the dashboard (just lifting it up, really) and replacing it.

  • 1 month later...

What a PITA place for the actuator to be located. I cant even get my hands in there far enough to touch the unit.... I got the missus to try and she can just touch it along with the first bolt, but not enough to undo the first bolt.. let alone the second one.

So far we've both tried and we've spent more time just trying to get to it then im willing to admit.. :whistling: The only thing we've got to show for it, is the constant clicking noise on start and badly sliced hands :(

Has anyone else managed to do this on a S2 without removing the entire dash? It's driving me crazy!

Or is there anyone in Perth who has managed to do it who could help me just to get the unit out??

Cheers

Adam

  • 5 weeks later...

I'm stuck at the photo that KrazyKong took.

I've moved those 4 screws, and I can now move then condensor? To the left by a cm or 2 and I can't pull it down to hear the 'pop'.

Am I also meant to unscrew the white plastic box to the left of it as well? If so, which screws? :S

Such a headache and small amount of room due to the passenger airbag..

  • 2 months later...

I signed up purely to say thanks for this! I got my car 2 weeks ago and this has been driving me crazy, I was ready to pull the dash out! All went pretty smoothly, the hardest part as other have said is that back bolt. I dropped it and nearly lost it when trying to do it up, but managed to get it back. Also I lost that little copper strip, but it still works fine without it. Another problem I had was that one of my other smaller cogs had a missing tooth, but I worked out that it doesn't quite do a full revolution, so I positioned it right and its all good, until another one breaks off :P Now just to fix my actual air-conditioning :/

Thanks again!

  • 9 months later...

This is a bad bump but hoping I get a reply. I did this about a year ago. Fixed it. Today it came back. Everything still works in relation to air flow in my AC. I'm going to disconnect this piece of shit. Would it affect my AC and if so i what way?

I did this in my S2 without removing the dash. Can't remember how so this is gonna be interesting job for tomorrow. Now we have 3D printers, we should get someone who is familiar with CAD to design a replacement piece and have it printed by a company who does 3D prints! I'll if my colleague can design it, if so, I'll get in contact with another work mate who has a printer and see if he can print out a batch!

Well when I replaced mine twice, both old units were impossible to open with out breaking... if you can find a method and make the cogs you'd be in business!
I think it's nearly impossible in S2 with passenger airbag, but happy to be proven wrong!

  • 1 month later...
  • 4 years later...
8 hours ago, elohim_imanu said:

Thanks for this thread. It has been helpful to help me fix my R33 S2. I made a video that others might find helpful.

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Interesting.  Great info. thank you.  Give a few days to get that name plate.  I have a busy life most weeks.  I will be in touch.
    • Strange your posting about this being an issue. Move the harness or change your wheels or run more camber etc. Have the thing not touch the thing so it doesn't destroy the thing.  Short answer, no. Slightly longer answer, the factory fuel gauge is measuring resistance. You need to wire in the FPG fuel level sender into the original factory fuel level sender wiring.  I drew you a picture to explain this one The factory strainer is quite long, reaching down into the bottom of the tank. Safe bet your aftermarket fuel pump has a little baby sized strainer that probably doesn't even point down towards the bottom of the thank.  Solution, move the pump lower down in the tank, or fit a longer strainer, or do both. I did both, I've run my tank down to 5L remaining and the car still drove fine.   
    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
×
×
  • Create New...