Jump to content
SAU Community

Wtf Is This?

mickey

By mickey,
in WA Wasteland

 Share

Recommended Posts

mickey Proficient

mickey

Posted
Posted

So it's the new year and I walk outside to have a look around and there's this thing walking around the ground so I take a snaphot:

754299286_TPzGE-L.jpg

any idea what it is? I live NOR and I also saw a smaller version walking around as well which looked similar without wings.

It's got a massive head and forelegs and when provoked it didn't try to fly but I assume those are wings for doing just that or long hops...but it just kept walking along and didn't try to hop or fly.

After all that it's probably something common like a variety of earwig or something :P

Link to comment
https://www.sau.com.au/forums/topic/302080-wtf-is-this/
Share on other sites
TAKUSHI Proficient

TAKUSHI

Posted
Posted

hahaha siiick now for sum ammusement, next time u find one, put it on sum plush carpet an watch it try to dig its way into it hahahaha

kept me entertained till a mate saw it freaked out an stepped on it haha

Link to comment
https://www.sau.com.au/forums/topic/302080-wtf-is-this/#findComment-5014791
Share on other sites
  • 3 weeks later...
  • 1 month later...
 Share
Go to topic listing


  • Latest Posts

    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Bncr33nokout
      Hey lads just a fellow gtr owner

      By Bncr33nokout · Posted

      Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • slamaa
      R33 GTR/GTS25T Rear Trunk Finisher Panel, 2-Door Models

      By slamaa · Posted

      Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • Thatjuan
      Nissan Gloria Hy34 issues

      By Thatjuan · Posted

      How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...