Jump to content
SAU Community

Resprayed My 33

TWINS33
 Share

Recommended Posts

thrtytwo Veteran

thrtytwo

Posted
Posted
thanks guys, yeah i figuered that out about the wheels there were black before and still they looked dirty all the time.

its made 206 atw on 12.5 psi standard turbo im looking at upgrading to a hi-flow so hopefully be making 250+

other than that its got cusco coil overs, racing seat and a few other small mods

this week im having a walbro 550hp fuel pump installed and a hicas lock bar along with the cat removed from exhaust.

theres alot more i want but dont have the $$$ but eventually it will get there.

i want to make it driftable streetable and maybe kinda showable aswel :action-smiley-069:

all feedback is apprectated

cheers!!

colour looks nice with white wheels mate ! future plans sound good too :wub:

im guessing you mean 206hp atw not kw ?? seems low, my old 32gtst made 200hp atw with a 3" exhaust and a pod filter

Get EPIC Rising Star

Get EPIC

Posted
Posted
colour looks nice with white wheels mate ! future plans sound good too :action-smiley-069:

im guessing you mean 206hp atw not kw ?? seems low, my old 32gtst made 200hp atw with a 3" exhaust and a pod filter

No,i'd say he means kw.Or else i think he would have got it fixed before making it look pretty!

thrtytwo Veteran

thrtytwo

Posted
Posted
Mine made 195kw on stock turbo on a dyno that is said to read low compared to some. Some engines tend to be freaks so you never know :action-smiley-069:

yeh true I suppose, i didnt expect even the measly (in comparison) 200rwhp from my stockish car so i guess the 33 would make a fair bit more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      No intention of driving the car the way it's set up now, just wanting to make sure I haven't made any mistakes along the way so that the tune can go smoothly, I don't want to waste anyone's time with stupid issues. And of course I intend to get it towed to the dyno in a completed state 😅 I have the base fuel pressure with the vacuum disconnected set at about 40psi, which I believe is at least relatively close to stock fuel pressure, maybe I'll have a fiddle with the reg and see what happens. For all I know I could be wasting my time with this and I should just plumb it in and see what the tuner reckons. I just find it a bit strange that it seems to be under so much load just free revving, but maybe that's just a result of the turbo slowing down the exhaust gasses and making a restriction in the flow, with no boost to compensate.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      The boy just hit up google translate and it worked a treat, he said step one was "please urinate with precision and elegance", he then sent me the correct translation  I get some new loctite for the small fixtures tomorrow and get some "dort" going after that 🤣
    • Kinkstaah
      RB25 S2 Idles but doesn't want to rev

      By Kinkstaah · Posted

      Right, so is the fuel pressure the same as it was previously? If not, well, it's not going to work well. I can understand the theory I assume you are going for, which is: "Run it N/A, and if I have the original AFM, and same amount of fuel and intake air as previously, the fact there's a turbo in my exhaust should still make it run" Which it... might? Provided you don't actually change how much air or fuel is going into the car.. or getting out. But if you have changed that, all bets are off. What is the purpose to even have the car run this way? To get it to a tuner? And if the goal is to limp it to a tuner, you're still going to what - plumb up a whole intercooler system and new intake in the parking lot out front before your tune......?
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Kinkstaah
      RB25 S2 Idles but doesn't want to rev

      By Kinkstaah · Posted

      Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
×
×
  • Create New...