Jump to content
SAU Community

Recommended Posts

Hi guys, iam doing a garage clean out for new years as its one of my new goals so i can finally work on my car in there hehe. Everything must go

RECARO recliner drivers seat with recaro skyline r32 rail. Sweet seat for drift,drag or street, has a couple rips and slight fade in center of seat just a dirty stain might come out. Rail will fit into silvias with one bolt only needing slight modification. A lot better then chinese seats out there

$380 with rail ready for quick clean and throw in( separate 280$ seat & 150$ rail )

post-18510-1262391943_thumb.jpg

Blue fixed-back bucket seats, PAIR, nor rails will get pics and price

R32 GTR front drivers and passengers seats matching pair. complete with rails. Nice and legal, drivers has one ciggie burn and small rip, just need a quick clean up good condition. $600

post-18510-1262391876_thumb.jpg

Original Bride Brix2, bucket Seat, suit smaller body size, Very good condition, practically new has been driven in once before engine blew up, now still sitting in car for the last year while waiting on new engine being built. Doesn't come with rail, i just need to sell the seat as my brother will be driving the car with me at the track and he is much bigger then me so it is slightly uncomfortable for him. $600

R34gt-t Standard Sidemount intercooler, couple of bent fins, otherwise fine $150ono

post-18510-1262388763_thumb.jpg

R32 Exhaust, complete Cat-back, Its a original Super Megaphone by Apexi i think, its a 2.5inch pipe going from cat to the resonator then goes into a 3 inch, The previous owner removed the resonator at right price exhaust and also got a straight pipe made with a flange at the diff for it. So the original Muffler is included which is awesome for the street to put on, then simply unbolt it and bolt on the straight pipe for the track. Its a preety good combo if you are running a street car on track etc. Selling complete $260

post-18510-1262388500_thumb.jpg

Supra JZA80 Drivers side Recaro Rail. Had a fixed back no brand seat on this one. Going very cheap $180, awesome for some circuit work.

post-18510-1262391799_thumb.jpg

Oil Cooler Kit, Sr20 Sandiwich made in U.S.A with Luis's Hoses and cooler. Never used it $150

post-18510-1262391636_thumb.jpg

R34 Silver Sedan Boot in good condition, Wing removed, Make an offer

post-18510-1262388881_thumb.jpg

Also have a R32 Original GTR front mount intercooler with Sard piping kit for rb20,few bent fins on bottom but o holes. Was in my gf's gts-t was a straight on fit for the cooler and preety stealthy. Good response even with stock turbo. The pipes are polished alloy and the intercooler comes with brackets and bolts with rubber mounts for the intercooler to bolt on. No brackets required to mount the cooler. I just dont have any silicone hoses or clamps. I used a combo of old rb20 hoses and some random ones. $280

post-18510-1262390079_thumb.jpg

S13 front headlights, preety good condition Sr20 type Three Circles [<00o===o00>] Type, one side bracket has been glued back on. no problems$280

Used HID Kit i bought from Japan with other stuff, 25k if i remember correctly, i havent used them myself but were said to be in good cond. $110

post-18510-1262390187_thumb.jpg

R34 Nissan Skyline man ABS Gt viscous LSD in perfect condition. Came out of a low km car, can use in s13 with other halfshafts $250

Power inverter from dc24volts to 100ac volts, i havent used it $20 come get it or $120 with the hid kit.

post-18510-1262390272_thumb.jpg

Old saas deep dish wheel, has alot of battle scars but still ussable, would suit drift cop or ke70 or R31 etc for Archiefield, of if you use gloves would be ok, or if its worth for somebody to play with it and get it recovered. come take it away $10

post-18510-1262390359_thumb.jpg

SplitFire Coilpacks to suit Rb25 NEO, didnt have much use on the motor, selling to get some money back $500

post-18510-1262390439_thumb.jpg

Original TRUST Oil Cooler kit, originally came of a Y33 Gloria ??? i think, might have the same sandwich as sr20 looking at the oil filter, easy fix with another sandwich, braided lines and all original EARLS Fittings and GREX sandwich. $280

post-18510-1262390587_thumb.jpg post-18510-1262390607_thumb.jpg post-18510-1262390638_thumb.jpg

BRAND NEW in boxes still 17inch wheels, 5 spoke shadow chrome/silver look, 5 stud 114.3 skyline, supra, s14,15, sw20 mr2 etc, These are brand new , never been fitted yet ,will get offset and witch of all four wheels forgot it now, i have a 4 stud machine for the street now so i wont be using these wheels, they have been only taken out of box for pictures

$800

post-18510-1262390714_thumb.jpg

R33 Skyline dash cluster plastic surround insert of a series I I think , brand new with toners . $50 good idea if yours has faded/cracked or somebody has painted it and you want a clean stock look.post-18510-1262390735_thumb.jpg

post-18510-1262391576_thumb.jpg

Located in Southside Brisbane, about 5 mins drive from Springwood Macdonalds. You can pm me, Thanks

Edited by familka gtr

Interested in Original TRUST Oil Cooler kit, originally came of a Y33 Gloria ??? i think, might have the same sandwich as sr20 looking at the oil filter, easy fix with another sandwich, braided lines and all original EARLS Fittings and GREX sandwich. $280.

PM Sent. :-)

Interested in Original TRUST Oil Cooler kit, originally came of a Y33 Gloria ??? i think, might have the same sandwich as sr20 looking at the oil filter, easy fix with another sandwich, braided lines and all original EARLS Fittings and GREX sandwich. $280.

PM Sent. :-)

willing to post cooler kit to sydney 2166? pm me

Sorry guys , TRUST cooler kit been sold .

Edited by familka gtr
pmed you about the wheel, please get back to me

Sorry guys for delay I was in hospital for while so I didnt respond any of PM.

Wheels are 17 x 7.5 , bore center hole 70.9 and offset isnt on the box , but I will check it for You

  • 8 months later...

GTR cooler - still available? - if so can I grab some contact details off you please (PM)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have some genuine Japanese legally decommissioned car number plates now in stock 🙂 Add some legitimately obtained JDM style to your Skyline or other Japanese model, or simply as a garage/man cave decoration! About the 40mm hole: The Ministry of Land, Infrastructure & Transport in Japan recognised the popularity of keeping decommissioned plates among car enthusiasts and came up with a method to "destroy" (or render them unusable for street use) while still retaining their collectable/usable value for display etc.  We have 40mm hole covers available to cover the hole nicely with a Sakura motif, which are also available in white in (very!) limited quantities, however they frequently sell out. Please let me know if you're wanting one or more of these and I'll check availability. The Sakura motif covers are more common. https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-su-7515 https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-400mm-hole-cover *Please note that we can't obtain particular number or area name (eg: "Gunma 500 Fu ・86") if requested. All plates are provided as they become available after decommissioning. 
    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
×
×
  • Create New...