Jump to content
SAU Community

New Project Drift R324door Rb25det, What Turbo? So Many Options!

DriftSquad

By DriftSquad,
in Engines & Forced Induction

 Share

Recommended Posts

DriftSquad Experienced

DriftSquad

Posted
  • Author
Posted
the OP should search my post history and suss out my results on my car. i too had/have a r32 4 door drift car with rb25det. I was making 280 rwkw with a 3071R with .73 rear housing still lowmount and IW. I also ran cams and saw peak power at 6900 rpm at 16 psi. There was stacks of midrange and had no issues frying the tyres.

wow nice mate! very helpful post! and very impressive result and video. when where u making boost? i think this might be the turbo for me.. maybe with the smaller housing? what do u think?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
too many variables in it to answer a question like that.........

Yep :blush:

You'd be assuming at least 300-400rpm, which can make a setup quite different but ye - all speculation

Simon-S14 Grand Master

Simon-S14

Posted
Posted
wow nice mate! very helpful post! and very impressive result and video. when where u making boost? i think this might be the turbo for me.. maybe with the smaller housing? what do u think?

i wouldnt go any smaller then what i ran.

was making full boost by 3200 - 3500 rpm, hard to judge sometimes as it shot up pretty damn quick. with cams was seriously responsive. No VCT used either. With no cams it required 20 psi to make same power and kinda lacked some midrange but still went well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for ?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for  >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate modern almost all cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
    • MBS206
      Wont start unless i have the pedal to the floor

      By MBS206 · Posted

      Let's be wary though, if cranking is so far off, what else isn't set right? Are the dead times set right, voltage compensation etc?   It definitely sounds like it's cranking fuel issues, and holding flat to the floor is shutting them down, but I'm with Duncan that if nothing was changed in the ECU at all, and then this started, I'd be more thinking a leaking injector.   Do as Duncan said, drop the oil and make sure it's not full of fuel.
    • Kinkstaah
      Wont start unless i have the pedal to the floor

      By Kinkstaah · Posted

      It actually means give it less throttle.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      Yeah if the goal is to drive something then modifying a car is a bad idea.
    • MBS206
      Beers and skylines Fatz style

      By MBS206 · Posted

      Wowee! She looks like a major handful out there Pete!
×
×
  • Create New...