Jump to content
SAU Community

Recommended Posts

Hi All,

About to purchase a V35 but the Pop-up LCD sticks when you try to raise the screen.

Just wondering if anyone else has experienced this and was it a major job to finish.

I know its not a biggy especially as I won't have the LCD operational for a little while but everything else on this car I like and if I can fix this issue easily, I would like to make the purchase :P

Link to comment
https://www.sau.com.au/forums/topic/302363-pop-up-lcd-sticks-when-opening/
Share on other sites

depends where it sticks. there are two giudes at the base of it and a decent spring. if the spring is stuffed then you get part of the problem. guides are greased and if there is crap on them you also get that probelm. getting the thing out to check is a bitch.

depends where it sticks. there are two giudes at the base of it and a decent spring. if the spring is stuffed then you get part of the problem. guides are greased and if there is crap on them you also get that probelm. getting the thing out to check is a bitch.

Hi Chris,

As per our phone conversation here are the 2 links of 2 cars I am interested in :-

http://www.carsales.com.au/all-cars/privat...35&trecs=36

The link above is the 2001 model which the LCD sticks and you need to tap the side of the unit to get the LCD up.

http://www.carsales.com.au/all-cars/privat...35&trecs=36

The link above is the 2004 which I am unsure if it has the LCD screen at all, also I am unsure if it is the 4 or 5 speed.

Let me know what you think ?

Thanks

Hi Chris,

As per our phone conversation here are the 2 links of 2 cars I am interested in :-

http://www.carsales.com.au/all-cars/privat...35&trecs=36

The link above is the 2001 model which the LCD sticks and you need to tap the side of the unit to get the LCD up.

http://www.carsales.com.au/all-cars/privat...35&trecs=36

The link above is the 2004 which I am unsure if it has the LCD screen at all, also I am unsure if it is the 4 or 5 speed.

Let me know what you think ?

Thanks

Also there is this one , I am really excited about this one as its from a dealer 'Kamakaze Motors'

http://firesport.com.au/2001-v35-skyline-c...s--ad142733.htm

1st car - I have a navi box for that one IN ENGLISH!

std interior - good idea. did that exact car about 3 weeks back now- car was from MLB as well.

electrical issues are as I mentioned. radio being the key item.

2nd car:

better from a modifiers standpoint. no dicking around with audio - rip that out and go again - radio only. to be honest toss a all in one barand name piece in there and you are done.

externally - better car.

3rd car:

NO!

if I cannot see a decent shot of that thing then that tells me something is hiding.

if you DO inspect that one - check the seatbelt dates. if they all match great. if not - walk away.

I haev see those with full frontal hits and you would not have picked it.

Damn, I didn't read your post Chris and put a $250 deposit on the 3rd Subject to a RACV and Finance. So I didn't check the seatbelts I bought it from a dude called Shui @ the former Kamakazi Motors. I will post some pics soon as I get damn bluetooth working. It seemed what I was looking for at the more right price... :blush:

last time I did this it was with a scan tool and a customer with a $38k cheque in his hand. even with photos at hand I still tore a certain black coupe to shreds with paint,belts and undercarrage damage. I think you get the gist. get hte thing UP on a hoist, inspect EVERY inch of it and look at teh seams. also take your favorite fridge magnet with you as you will need it. get a totally UNBIASED report on it. as a marker I know of a car here in brissy (blue coupe) that has the entire passenger side done and externally you wouldnt pick it. I didnt until I did the audio in it and found the cut/pick marks onthe inner shell.

key point - inspect the hell out of it. granted its not a $100k car but its still a deecent whack of $$ to lose.

that side of things is up to you. I'm offering an opinion based on previous cars I have seen/worked on. there are others on this forum that know a lot more than me on them only they tend to post a lot less than I do.

hence my comment. I dare say when you look at the paint (and being black it will be VERY obvious) that you will see different shades as well. if you are lucky you will see the overspray as well. also look under the seats for the airbag harnesses that are bypassed (assuming it did the bags or the pretensioners.) as well. there are a LOT of little things on these that get stuffed up when you crack them into something so be wary on that.

If you can find out it's history and it's only a small bump. Why not.

But if it has taken a big hit then there could be all storts of nasty surprises.

If you heart is set on this car then spend the money and get a pro to look at it. If your unsure, keep looking for that prefect V35 it maybe the very next car you look at :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...