Jump to content
SAU Community

Recommended Posts

Just bought this R-34 GT-T (98) 2.5 L 2 door recently, it seems to overheat only on 35degree days or higher especially when running the a/c. Makes no difference if im in traffic or crusing down the motorway, i make sure coolant is there, any suggestions or help with this ?

Link to comment
https://www.sau.com.au/forums/topic/302388-gt-t-overheating-assistance-plz/
Share on other sites

with these thing hard to say i would be getting the cooling system pressure tested, also think about basic things like replace the thermostat, radiator cap, coolant and maybe get the radiator cleaned out professionally in case its blocked.... if non of that helps maybe its got a blown hg slowly on its way.... you would hope not thou.....

Edited by rgr34
with these thing hard to say i would be getting the cooling system pressure tested, also think about basic things like replace the thermostat, radiator cap, coolant and maybe get the radiator cleaned out professionally in case its blocked.... if non of that helps maybe its got a blown hg slowly on its way.... you would hope not thou.....

cheers. i did get the first things done already, maybe now ill get the radiator/head gasket checked out professionaly.

Which is a good mechanic to take skylines for servicing with decent price?

Same thing just happened to me. Only just made it home so I was lucky in that regard. Smoke was coming out of the radiator hose and somewhere from the back of the engine to, couldn't see where it was definitely coming though.

Radiator hose was loose so I'll tighten that up and top up water & coolant levels once the engine has cooled down...and if it still overheats then I'll be coming back to this thread needing help haha

My clutch is pretty f***ed at the moment, although I didn't think that would be a cause to the car overheating?

So I put the radiator hose back in place and topped up the radiator with water. Yet it still overheats, this time its spitting and steaming from the top radiator hose (radiator end) and also, when I hit boost, the car basically starts shaking. Whats up with that?

My clutch is pretty f***ed at the moment, although I didn't think that would be a cause to the car overheating?

So I put the radiator hose back in place and topped up the radiator with water. Yet it still overheats, this time its spitting and steaming from the top radiator hose (radiator end) and also, when I hit boost, the car basically starts shaking. Whats up with that?

I mean the fan clutch.

there ae plenty of things to check before looking at headgasket, etc when it comes to heating issues.

first is to bleed the system. this is free and a good place to start. also check the clutch fan while you are at it as it's something you can check yourself. also check for any crap between the radiator and the aircon dryer/radiator. this can sometimes get a bit blocked up and educe airflow if the car is often parked unde a tree and leaves fall onto the front bar and get sucked through the grill when the car is started.

next is to replace the thermostat as this is something that does need to be replaced over time and would probably be the cause of a lot of heating issues. replace the coolant while you are at it.

then you could get the radiator professionally cleaned. in my opinion radiator flushes don't do crap as they don't get out the build up of crap that blocks the radiator core.

next on the list is the water pump. if the impellor in this is worn it won't pump the water fast enough and cause heating issues (anyone that has ever owned an outboard will know all about impellors and water pumps)

unless there is a reason to check the headgasket (such as oil and water mixing together) or bubles in the radiator when the car is running or the car is hard to start then when it does start blows a heap of white smoke for a short amount of time i don't usually bother. and milky oil or coolant isn't always the sign of a blown headgasket. i've had 2 blow and not ended up with the milk of death, but instead ended up with coolant in the cylinders.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...