Jump to content
SAU Community

Recommended Posts

I guess this is a subject that pops up now and then with no real resolved ideas.

I have a S1 R33 gts-t 4door AUTO. It has the full m-spec body kit already.

NOW..... i am putting the FULL factory R33 GTR front end on it. I prefer the std look not the N1 etc.

All i want to do, is add the WIDE rear guards like the AUTECH 4door gtr version..... thats it....... no prawn trawler body kits etc ..... Just an identical wide rear guard.

I will mold the m-spec side skirts to fit front and rear..

Has anyone done this at all ????? (i think i read 1 guy did, was full custom, any pics mate ?) If i cannot buy replica guards that look EXACTLY like the autech, then i will get it custom done in metal.

Oh, and for those who bag people who do GTR stuff on there GTS-T's, the motor is a full house RB 2630DETT with twin GT-RS's running pump OR Methanol when racing, so im not pussy footing around.

However STILL using a worked AUTO. Oh and i will be putting on those awesome "GTS-R" badges east bear make !! ;)

Gary

GT-R%204%20door%20white%20front%20right.jpg

GT-R%204-door%20side%20front.gif

1_10_01_2005_12_48_EAST_BEAR_GTSR_BADGE.jpg

Link to comment
https://www.sau.com.au/forums/topic/302412-r33-s1-4door-wide-rear-guards/
Share on other sites

Yeah i have resigned to the fact that i will have to Rhys, which isnt a bad thing, as it means i will have quite a unique car.

Because for the 4dr gtr's, they only ever came in S2 spec.... notice the popped out rear taillights.... which i hate. So i will make a S1 4dr autech gts-r haha :(

Gary

Hey mate,

Just done a wide rear guards for a gtr on my gts-4 2door coupe atm...contact PSI Parts in Dandenong Melb, or www.psiparts.com.au

They are fibreglass guards for $299, if your after metal guards from a GTR unsure, guess it'll have to be custom

Dan

My mates actually looking at doing the same conversion but super widebody on a 4dr 32...will let you know how that goes

Edited by ShyBoi
Yeah let us know Dan, thanks

Unfortunately the only rear fenders i've seen , including yours are for the coupe version of the gtst ... nothing for the sedan .

Gary

start with the coupe fenders and modify em. most of the 4 door skins I've seen look like arse or something out of a sci fi movie.

I thought the same about the coupe rear fenders they do , can't say they look like a gtr fender..... more a compromise.

This is not a job for the average panel beater..... its needs the attention of a wizz. I know just the guy up here in the north..... problem is getting his time !!

What would be good is to know someone with an autech 4dr gtr so i could get some measurements.......

Anyone got any really high res photos of the 4dr gtr's ? All the pics or vid online ive seen is pretty crappy....... need some good pics to show panel guy.

Gary

Edited by Fastrotor
  • 4 weeks later...

Hi Bud,

Ive been looking at doing this for a very long time, ive even tried talkin to nissan/ autech in japan to see if I can get the specs of the rear panels on the autech 4 door but with no luck. I was even told to order rear quarters i would need a vin number of an autech edition :cool:

Anyway i spoke to the fella who owns www.jessestreeter.com and he mentioned to me that if i can get a part number for these panels from nissan he should be able to get it, but there in lies the issue....

Il add some pics up and from what i can see the autech wider body starts from the middle of the rear doors and from what ive noticed on my 4 door there is a little bulge but no where as near as the autech.

Lemme know if you hear anything coz im interested as you can see.

Heres some of the other kits ive been looking at from japan just out of interest.

Aero Palace( http://www.aeropalace.co.jp/sports)in japan have 3 kits , Impul, BN and their own for an r33 4 door. I even thought of taking the rear quarters from the BN Kit and try to reduce the width since i didnt want the wide body look.

Heres some pics as well.

post-27757-1265159963_thumb.jpg

post-27757-1265160001_thumb.jpg

post-27757-1265160308_thumb.jpg

post-27757-1265160346_thumb.jpg

post-27757-1265160364_thumb.jpg

post-27757-1265160379_thumb.jpg

enr33...r u sure, cause I have a GTS-4 and the chassis no. is ENR33 ... :P

that's exactly what they're based on... R33 GTS4's 4 door sedans. Basically the chassis is put together at nissan, but before the mechanicals go onto it, its pulled off the line and sent to Autech/Nismo/Altia/HKS etc.

If you punch the number in Nissan FAST, a blue box pops up and tells you that its a special edition and that you need to contact the shop for further details.

LOL :)

So what happend to the Vin number of an autech. Also there was a fella on this forums a while ago, pretty sure from qld who did a couple of mock ups of the autech. I cant for the life of me remember his name.

Anyone know his name maybe his contact numbers??? he might still have the moulds???

your best bet is to grab an R33 2 door GTS to GTR conversion kit ("skyline imports" in QLD had a copy of one back in the day 9 years ago, so I'm sure they're floating around oz) and then chop the rear and custom fit it to the door etc.

gtr-12.jpg

http://www.h4.dion.ne.jp/~west-y/r33gtrlooks.htm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...