Jump to content
SAU Community

Recommended Posts

We are on holidays :D

Next committee meeting isnt for a couple of weeks yet. I like to give committee members a few weeks break - they do work pretty hard :P

There will be one - always is one... just takes a few weeks for everyone to wind up into swing again.

Plus elections are in Feb (more info to follow in coming weeks) :)

lol i'll give you some pics that i might take this yr. as much work as you'll ever get out of me :) in all seriousness though, how come no calendar. i woulda thought that since last yr's template was available, and looked the goods, its just a matter of substituting new pics.

edit: i do realise that since its already 2010, it may be too late to collect pics and get it made in time.

Yep :)

It was tabled, there was a volunteer to get it done, sadly they ran outta time before we had time to replan - that's how it goes sometimes unfortunately.

Its not a set template either, gotta change it up each year or it'd be rather, bland if you know what i mean.

Printing is the easy part, everything else doesn't change a lot.

Damn the SAU 09 calender had pride of place in our kitchen....no SAU 2010 calender means it'll prob be replaced with some BS anne geddes one or some sh1t :)

It was tabled, there was a volunteer to get it done, sadly they ran outta time before we had time to replan - that's how it goes sometimes unfortunately.

Oh well it happens, but if you can see that times running short post a thread asking for help as the committee have done for other things...and yes I am aware of how many responses you get for the requests for help but you never know.

Oh well it happens, but if you can see that times running short post a thread asking for help as the committee have done for other things...and yes I am aware of how many responses you get for the requests for help but you never know.

We didn't see time was going to run short - late notice and all :)

So ye, if we had've known, might have been possible. Unfortunately i can't micro-manage every little task :rofl:

And ye, responses for volunteers/committee helped etc is always met with... zero. Sometimes one. Usually zero.

Hardly enough people putting thier hands up out of nearly 400 people. Means those who are dedicated, really have to put in serious hours... heavens help the club if those people stop...

I really would like to see people step up in 2010 and get onto the voting/nominations etc in a couple weeks when posted.

All well and good to say you are keen, doing it is another i've found!

Perhaps if there is enough interest in making the club calendar an annual thing - then it should be included as a responsibility of one of the sub-committee members to coordinate. This will ensure at least one person will be on to it, instead of everyone thinking it's someone else doing it. I call it management delegation :rofl:

There was someone who said they would do it - regardless of it being "listed" or not - if you are doing it, you are doing, that is how i run my ship :rofl:

It's my fault for not chasing it up, but when S'n'S, Gala Ball (then throw in other members with DECA) etc etc required more time than i thought, somethings get forgotten.

Sometimes in a group of volunteers, such outcomes are unavoidable.

But everyone reading this going "bummer" - i challenge you to come onboard in 2010 and see how much work is involved.

We ALWAYS need dedicated & committed people to give us a hand. Never a time when we don't these days.

Well Ash, if you guys needs someone to design a calendar, I'm more than happy to donate my time for it :D

As a matter of fact, I'm more than happy to help SAU with ANY design work, that needs done. Just lemme know :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...