Jump to content
SAU Community

Recommended Posts

Hey guys

Iv decided to wreak the rb26 out of a C33 Lural.

Condition - Engine was running fine in car prior to dismantal. Eng has been in storage for bout 5 months awaiting conversion.

Parts Available:

- Tomei Adjustable gears - $250

- Jun? Cams 260 deg with 10.5m lift. Previous owner said JUN, no logo's on the camrs but the size is written at the back and condition is very good. $750

- R34 N1 Ballbearing turbo's. Still have green paint on front wheel, very little use and no unusual shaft play. Complete with lines etc and adjustable actuators

$1450

- HKS 660cc injectors - No rail just injectors $500

-RWD Converted sump - factory alloy one modified - $250

- Complete stock head with plenum and normal injectors. Covers, crank angel sensor etc - $1500

- Good bottem end with rebuild history 20,000ago, nothing crazy just freshen up in Japan. $1250

- GTR loom - converted to C33 lural - $250

Your probably wondering why im pulling apart a good working tuned GTR motor, well basically i dont want to hang onto it for 4 or 5 months till someone spends $5000 for the conversion

All parts i am happy for inpections on, i can also arrange mechanical inspection if your buying from interstate.

contact me on 0421524208

More pics to come tomorow, for now here is a few iv taken

post-11640-1262779573_thumb.jpg

post-11640-1262779796_thumb.jpg

post-11640-1262779897_thumb.jpg

post-11640-1262780036_thumb.jpg

Hey guys

Iv decided to wreak the rb26 out of a C33 Lural.

Condition - Engine was running fine in car prior to dismantal. Eng has been in storage for bout 5 months awaiting conversion.

Parts Available:

- Tomei Adjustable gears - $250

- Jun? Cams 260 deg with 10.5m lift. Previous owner said JUN, no logo's on the camrs but the size is written at the back and condition is very good. $750

- R34 N1 Ballbearing turbo's. Still have green paint on front wheel, very little use and no unusual shaft play. Complete with lines etc and adjustable actuators

$1450

- HKS 660cc injectors - No rail just injectors $500

-RWD Converted sump - factory alloy one modified - $250

- Complete stock head with plenum and normal injectors. Covers, crank angel sensor etc - $1500

- Good bottem end with rebuild history 20,000ago, nothing crazy just freshen up in Japan. $1250

- GTR loom - converted to C33 lural - $250

Your probably wondering why im pulling apart a good working tuned GTR motor, well basically i dont want to hang onto it for 4 or 5 months till someone spends $5000 for the conversion

All parts i am happy for inpections on, i can also arrange mechanical inspection if your buying from interstate.

contact me on 0421524208

More pics to come tomorow, for now here is a few iv taken

post-11640-1262779573_thumb.jpg

post-11640-1262779796_thumb.jpg

post-11640-1262779897_thumb.jpg

post-11640-1262780036_thumb.jpg

Would you let the Tomei cam gears go for $200 Posted to NSW?

cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...