Jump to content
SAU Community

Recommended Posts

Dunno mate, all I know is the oil's are not compatible. From reading level323's post's in the other thread linked above, it seems like its just an oil change but I really dont know.

I'd shoot him a PM and see if he replies

Well I spent a lot of time talking to a rep from HiChill yesterday which was fascinating. Basically Bozz is on the money about the deal. HiChill is simply a mix of iso-propane and butane (called hichill -30). You can buy it off the shelf from R&E parts in Glen Waverley - aristoc road. The mechanic next door is going to put it in my 94 gts-t which is currently running R134a, all that is involved is a flush (most importantly to remove lubricant which converts to acid in the presence of moisture) and new receiver/dryer which I have been advised is recommended for any re-gas anyway (if you like doing things properly). It is flammable but there appears to be a lot of misinformation about this and the relevance of the flammability of less than 300gs of butane, when you consider you have 50L of petrol or LPG anyway :D.

If you have an early model R32 which is installed with R12 then usually it's as simple as removing old gas and installing hichill. R12 doesn't use the nasty lubricant and hence a flush isn't required. I called around a few places and prices are generally around 60-80 for a straight re-gas and 200-300 for a flush and new dryer.

Thanks Bozz, the mechanic I spoke to wasn't happy about putting HC into a system designed for 134A is the compression issue the likely reason why? Or does 134a have exactly the same problem?

oo it can be used in R134a you say? Keep me up to date with this. I might change mine to HC if it can run fine in r134a.

Cheers

I can't see any reason why it couldn't.. basically as long as you follow the guidelines for the gas it will behave like any other refrigerant. He wont give me a warranty however lol.

  • 4 weeks later...

Grrr still no aircon.. apparently compressor is toast.. Now how does one get a good one? because everyone tells me if the compressor has been degassed even for a few hours the compressor will cop it. Find someone wrecking a car with a complete system still working?

Grrr still no aircon.. apparently compressor is toast.. Now how does one get a good one? because everyone tells me if the compressor has been degassed even for a few hours the compressor will cop it. Find someone wrecking a car with a complete system still working?

Thats odd?

I supplied a second hand one to be fitted by AC mechanic. It was posted from NSW to Vic and took a couple of weeks before it was installed. Working perfectly fine. (although it is making a racket now when idling due to the high pressure. This was after 1yr of installation)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Would you ever vent this bonnet or will it be unnecessary?
    • Happy new years folks! Wishing you all a successful year of money pit ownership!  So the subframe bushes are out....   Ok, who else has done that job before??  What a C U Next Tuesday of a job that is!  Be glad to not do that again in a hurry! I think I explored every option available to chop the middle section of the bushes out, most of them unsuccessfully! I dried a holesaw, die grinder, normal drill bit, air chisel, etc, etc. The true success happened by accident when I'd decided to try a step drill I spotted on the bench on the way passed.  See, there are benefits to never cleaning up after yourself! It RIPPED through so so much better than the drill bit. It has to be the skinniest one available so its small enough to fit between the inner tube and outer casing but it made easy work of it.  First one i hammered the shit out of... New method- 20250102_185506.mp4     I did the other 5 in less time than I fluffed around with the first one. I used the cut off saw (sawsall as the yanks love to call them) to cut a break in the casing. Even with that they're still a prick to hammer or air chisel out.  The last few i just went rambo with the air chisel without cutting them. I overcome one of the early ones so will hit the with the mig to fill the cut then sand it off smooth.  The carnage left over-   I've also been "nesting" ie, cleaning up my babies nursery,  ie cleaning the f**king pig sty of a shed. I've got that much shit laying around it's as cluttered as my head!  Getting things put away, in boxes, on shelves, hanging off walls, all to get some working space back again.  Hopefully that keeps me motivated....
    • AFAIK does the base map for Haltech even have the 4D compensation enabled? It's been a while but when I looked at it I remember it was actually using pure TPS as one load signal and MAP for another. Seemed workable but not ideal by any stretch. A lot of people have "make the event-itis" which leads to stuff like this happening.
    • https://www.youtube.com/watch?v=qHhWelSBppY
    • Even back in the day, some importers were renowned for bringing in crashed cars, giving them a quick touch up + respray and making them look mint
×
×
  • Create New...