Jump to content
SAU Community

Recommended Posts

+ it is all about the Offset sizing too!

62058040.jpg

63319620.jpg

:rolleyes:

Shakotan / Hippari Tire / Oni-kyan = Key to Hella Flush.

That much negative camber looks tarded....like the car has rickets or something.

Besides it compromises the handling & grip too much.

Besides it compromises the handling & grip too much.

because you've driven that exact same Aristo. especially when its airbags are at the right driving height. yeah?

because you've driven that exact same Aristo. especially when its airbags are at the right driving height. yeah?

Yeah how did you know? It was a boat I tell you. :rolleyes:

/How many race cars run air bags BTW?

That much negative camber looks tarded....like the car has rickets or something.

Besides it compromises the handling & grip too much.

:(

Too much grip?

The cars probably have air bag suspension, when parked, the cars are lowered, when driving, they are raised.

That's the point about bags, you can adjust the height.

These cars are street cruisers not race spec track cars.

;)

because you've driven that exact same Aristo. especially when its airbags are at the right driving height. yeah?
Yeah how did you know? It was a boat I tell you. :thumbsup:

/How many race cars run air bags BTW?

do those cars look like racecars?

:thumbsup:

:thumbsup:

Too much grip?

The cars probably have air bag suspension, when parked, the cars are lowered, when driving, they are raised.

That's the point about bags, you can adjust the height.

These cars are street cruisers not race spec track cars.

I see your point.

Still think it's 'tarded though. :thumbsup:

because you've driven that exact same Aristo. especially when its airbags are at the right driving height. yeah?

scarily they actually get around like that its called demon camber i think there is a site dedicated to it. i think it looks ridiculous but thats japs for ya..

guess its kind of a carry over from the oldschool bosozoku styling. bugger all regard for practicality and all focus on achieving a "cool" stance.

Imagine the tyre wear - I reckon drifters would get more kms out of their rears...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It will give gains, but you wont hit 600 It will give gains but it wont get you to 600 imo. You will also sacrifice low down and you will be adding extra volume if you port match it, more so if you port the plenum runners depending and how its done I think the only time youre going to see about 100hp gains is if the car is making well over 1k kw I do have a spare set that I was going to test with, but i dont actually think there is anything worth getting going larger. I did a fair few S14/S15 and the standard TB is fairly small, I went to 60 and in some cases 64mm which is significant over the stock unit. You can also get some weird ratio changes. I think 20kw will be a stretch on a roller dyno. If I had it apart I might mill the shafts a little and not expect much, I think the stock size is still pretty good for a street/track car even with larger capacity. I might change diameter it if its a drag only car
    • Was going to say something about flog, wife, pilates, behind but I better not... No dishonour here
    • Store bought, like dis  https://racecraftaus.com/products/muffler-oval-new?variant=39611886305393
    • As long as the bucket stays against the cam then it will measure up fine, the valve will close compared to a running engine but the bucket will stay against the cam lobe 
    • I feel like i would be like most people who get these, excited for the first 3-6 months and then just totally forget about it. The end products do look sick tho. Ive got a 1/12 scale r32 model, dunno where im gonna actually display it once its all done!
×
×
  • Create New...