Jump to content
SAU Community

Bedding In A Diff

conan7772
 Share

Recommended Posts

conan7772 Mentor

conan7772

Posted
Posted

Apparently upon bedding in a new mechanical diff you can either do figure 8's for 20 minutes

or

Have the diff specialist coat the disassembled plates with friction modifyer, then just drive off.

Still recommend changing oil after bed in.

What's the best way to go ?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/303528-bedding-in-a-diff/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted
Apparently upon bedding in a new mechanical diff you can either do figure 8's for 20 minutes

or

Have the diff specialist coat the disassembled plates with friction modifyer, then just drive off.

Still recommend changing oil after bed in.

What's the best way to go ?

Cheers

Do what the diff manufacturer suggests.

GTS4WD Grand Master

GTS4WD

Posted
Posted

As above.

Some diffs, like my Tomei (which I think is a re-brand of the KAZZ) suggest 20min of figure eights putting in the clutch before you turn in for the 180 degree turn at the top and bottom of the figure "8"

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

kaaz reccomend figure 8's for 20 min's in first gear (clutch in before turn, clutch out after turn)

nismo actually recommend going for a drive in the hills lol...

i did the figure 8's for 30 mins just to be sure, then dumped the oil...

rgr34 Proficient

rgr34

Posted
Posted

i had a mechanical diff put into a previous car i had, i never did any of this i just didnt do burnouts and i changed the oil after like 1000kms, and that diff worked fine.... what a waste of fuel doing figure eights lol... a good mountain drive fair enough.

conan7772 Mentor

conan7772

Posted
  • Author
Posted
$2000 diff...

$5 fuel...

somehow i think its a worthwhile expense

Certainly is.

Anyway, I'll be having Award do the install for me.

For anyone whose been to them...

Where the hell in Seven Hills can you do the break in without getting arrested ?

The Dan Grand Master

The Dan

Posted
Posted
lol i was reading this and thought people were taking the piss. As conan asked where are you meant to do this bedding in unless you time your diff install with a skidpan day

It has nothing to do with skidding the car.

Figure 8's can be done in as little as 200m2 so go to a shopping centre carpark on a Sunday evening. It doesn't require much thought.

conan7772 Mentor

conan7772

Posted
  • Author
Posted
It has nothing to do with skidding the car.

Figure 8's can be done in as little as 200m2 so go to a shopping centre carpark on a Sunday evening. It doesn't require much thought.

yeah ok.

But my intentions are:

Have award change the diff,

Hopefully return to their workshop around 3pm ,

do the break in somewhere,

return to them immediately to change the oil,

then go home.

I'm a fair way from Seven Hills.

:P

Marcus89 Proficient

Marcus89

Posted
Posted
It has nothing to do with skidding the car.

Figure 8's can be done in as little as 200m2 so go to a shopping centre carpark on a Sunday evening. It doesn't require much thought.

oh my bad way i was reading it was your meant to be sliding the car whilst doing the figure 8's :) man im a retard haha

Birds Grand Master

Birds

Posted
Posted
diffsonline.com recommend going no faster than 85 kph for 1200 miles !

That's going to be one boring drive.

Yep, I usually tell people no hard accelerating and nothing over 80km/h for the first 1000km to bed in the bearings, seals and tolerances. Then once in a while you get a VU SS ute come back after 200km missing half the teeth off the crown and stupid/honest enough to leave bald 20" tyres on the rear end :)

nismo actually recommend going for a drive in the hills lol...

LOL, that's asking for trouble. "90 degree drift along the mountain pass is desirable."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Returning Member

      By robbo_rb180 · Posted

      They work on really anything track related now. They do my mates r35 gtr and it's a weapon of a car.
    • robbo_rb180
      High temp brake fluid?

      By robbo_rb180 · Posted

      I use the penrite 600f in my cars and have had no issues even at Townsville v8s when I drove that but I bled fluid end of day for just in case. Good value and a about 38-40 on sale. Use castrol srf on the supercars and no need to Bleed brakes over a race weekend. Do the 1000km with no issues. Over 120 a bottle I seen at repco. A quality brake pad is always a good starting point the ebc stuff I've seen let go after 2 sessions with heavier cars. I'd be going to a decent track pad and maybe those porsche air guides on the control arm to help with some air over the rotor. Helps on 86/brz with stock callipers.  
    • Duncan
      High temp brake fluid?

      By Duncan · Posted

      yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
×
×
  • Create New...