Jump to content
SAU Community

New To State Need Help On Finding Some Wheel Spacers

turbo wranga

By turbo wranga,
in Western Australia

 Share

Recommended Posts

turbo wranga Rookie

turbo wranga

Posted
Posted

hi im new to the state and in a little trouble i bought new wheels for my s2 33gtst but i need spacers for the frount wheels as they dont clear the calipers can someone please point me in the right direction on where i can get some spacers in wa????

cheers!

wins_wbe Enthusiast

wins_wbe

Posted
Posted
hi im new to the state and in a little trouble i bought new wheels for my s2 33gtst but i need spacers for the frount wheels as they dont clear the calipers can someone please point me in the right direction on where i can get some spacers in wa????

cheers!

try search in WA for sale, try EBAY..

but spacers is illegal mate.. goodluck

LANDSCRIBBLE Mentor

LANDSCRIBBLE

Posted
Posted

I was thinking of getting some also, my front calipers are honestly about 1-2mm away from touching the spokes, should there normally be more clearance? is there anything to worry about? im scared ill take a corner a tad fast one day and shred my precious calipers and rims. have got 225's front and back.

Plus, are there any downsides with wheel spacers, apart from being illegal and "ricey"? - heard stories of driving to work and wheels coming off..

Sorry for all the questions.

Nic_A31 Grand Master

Nic_A31

Posted
Posted
I was thinking of getting some also, my front calipers are honestly about 1-2mm away from touching the spokes, should there normally be more clearance? is there anything to worry about? im scared ill take a corner a tad fast one day and shred my precious calipers and rims. have got 225's front and back.

You can take a corner as fast as you like, your calipers are never going to touch your wheels.

I was thinking of running some spacers, but decided against it. Why compromise the mechanical intergrity of my car for fashion?

spacers are mechanical? and contribute to the integrity of your whole car now ??

Spacers arent as bad as some talk them up to be.

Slip on spacers are fun for 5-10mm, anything bigger, using bolt on spacers is fine, but if you need that much spacing, you'd be better off buying different wheels.

Tony de Wonderful Veteran

Tony de Wonderful

Posted
Posted
spacers are mechanical? and contribute to the integrity of your whole car now ??

Spacers arent as bad as some talk them up to be.

Slip on spacers are fun for 5-10mm, anything bigger, using bolt on spacers is fine, but if you need that much spacing, you'd be better off buying different wheels.

What I mean is it's another component to fcuk up or fail.

I'm no expert but slip on spaces can't be as 'safe' as having no spacers. You put more shearing loads on your bolts, and because things are never prefectly machined you have scope for 'play' etc and eccentricity, precesion, may lead to vibration and metal fatigue. As for bolt ons now you have more bolts to fcuk up, come loose etc. I just don't trust 'em basically. Don't want a wheel flying off at 100 km around a corner. May be ok for show cars though. :(

br3ndan Mentor

br3ndan

Posted
Posted

Spacers shouldnt be used

full stop

Get wheels that are specified for your car.

You can go on all you want about how they are ok or whatever. Its not going to change my mind on them.

If you use them... you are stupid

Kabe Rookie

Kabe

Posted
Posted
Spacers shouldnt be used

full stop

Get wheels that are specified for your car.

You can go on all you want about how they are ok or whatever. Its not going to change my mind on them.

If you use them... you are stupid

True, they shorten the thread. However, if you get longer threaded bolts put in is that legal. That way your locknuts will fit as they would on a factory spec car. Can you get this certified? Anyone know?

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted
I was thinking of getting some also, my front calipers are honestly about 1-2mm away from touching the spokes, should there normally be more clearance? is there anything to worry about? im scared ill take a corner a tad fast one day and shred my precious calipers and rims. have got 225's front and back.

myne were like that for years, were fine until the left wheel bearing started getting some slop in it, spokes started knocking the caliper around right hand corners. didnt do any damage luckily.

auto pro also have slip on spacers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...