Jump to content
SAU Community

Recommended Posts

I think it's rather flawed this law. I always wondered why people weren't getting defected for suction cap GPS's while hard mounted guages were an issue. In the event of an accident the tacho ain't going nowhere. Both will be an intrusion to the driver either way. What if I used suction caps on a monster tacho? Would look ugly as heck but it would break off in an accident?

I'm old school. Gimme a street directory and I'll get there.

you could assume that,,,, but don't forget your listening to hear/say, ask rta they will tell you for sure, and see if you can get it in wrighting aswell

you could assume that,,,, but don't forget your listening to hear/say, ask rta they will tell you for sure, and see if you can get it in wrighting aswell

yeh good idea I will give them a ring. :P

just thought that i might be ok as my car is qld registered

behind the stering wheel its a defect if mounted on the pillar

it may well be, but like i said, i've been defected 3 times and never have had the rta or the cops say anything.

they have looked at it, but they have never defected me for it being there, yet when i had my other gauges mounted on the dash in front of the vents, i was defected for it so go figure...

a bit more hear/say Like Kujotk said ^^^ check with the rta, get it in writing and keep a copy in the car hehehe

bout 7 yrs ago now I got pinged for my 'A' pillar guage being 2 far up the pillar and was told by the blue slip bloke (real hard a$$ type) the entire guage must be behind the rim of the steering wheel ( the bit ya grip), moved it down and got passed

also I had tweeters in the vents(had them hid back behind the grill) , old eagle eye spotted em while sus'n my guage and made me move them 2, so I'd say guages in the vents would be out

I have in the past rang the RTA to ask specific Q'z and if ya nice enough they will post a printed extract of the regs

:Source

http://www.infrastructure.gov.au/roads/mot...adr_online.aspx

The Third Edition ADRs were made national standards by Determinations Nos 1 and 2 of 1989 published in Special Gazettes Nos S 264 and S 291 dated 2 August and 1 September 1989 respectively. However, the standards first became effective from 1 July 1988 to ensure that the transition from previous technical requirements was made smoothly. In addition, not all Third Edition ADRs applied as from 2 August 1989. Importantly, the implementation of the lighting ADRs was postponed until 1 October 1991 and 1 July 1992 for some vehicle categories.

The Third Edition ADRs were re-made as national vehicle standards in September 2006 to comply with the requirements of the Legislative Instruments Act 2003 (LIA) and registered on the Federal Register of Legislative Instruments (FRLI) (www.comlaw.gov.au). The list of Third Edition ADRs below has each version (e.g. /00) linked to the FRLI web site, where the ADRs, as vehicle standards (including amendments and compilations) and explanatory statements, can be found.

But they obstruct your vision.

I didnt read the full thread to see if this was answered but 3 diff cops ive asked about GPS units have told me "because they are considered a 'safety' item they are exempt". Meaning because it tells you where to go so you don't get lost it's allowed to be mounted on your windscreen?

By the way, i have one of these with 2x gauges in it:

autometerpods.jpg

Never been harassed about it.

If only a GPS unit could display boost and temps etc...

I have a single gauge in a cup on my A pillar mounted as low and far back as possible, and 3 under my head deck. That one officer is the only one to have said anything about it. As for what the officer told me it is pretty much hearsay too, they enforce the laws not make them. As everyone else has said check with the RTA or an approved engineer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gas MIG for learning, I was able to weld up some nice 1.6mm tubs so you can do thin stuff easily enough. Then moved on to thick caliper adaptor brackets with the same machine, all good.  Arc/Stick is great for dirty garden work etc, but Gas MIG for starting on car stuff.  Jump on the NCR FB page and search ATP Tubs or GKTech caliper adaptors for pics/info. I'm no pro but it wasn't hard to learn. Be willing to grind and go again though if it's cold etc. 
    • That's not a bushing!  
    • Oh and I got myself a grandpa spec dash mat.  
    • Ok, so first round of maintenance done. I didn't get much history with the car but I know it was well looked after. That isn't enough for me though, so ...  I had to do the oil filter housing gasket. It was leaking a lot, and also as part of that I did the anti-return valve and the VANOS oil line (from HEL).  But, then I got hit with the while-ya-in-there's. Did both accessory and A/C belts, tensioners and pulley. The accessory belt that came off had a huge hole in it, like somebody hung it up with a nail. The pulley and tensioners seem ok, so I'll keep those just in case. I did water pump and pump pulley. The water pump had a small bit of play so timing was good.  I also did fan clutch. I don't know how to test the old one but between the water pump and the fan clutch the car is running a little bit cooler (not much ~2 - 3 degrees maybe) so good result. Unfortunately the thermostat and housing didn't turn up in time so I'll shelve those. I have no concerns at all on the current ones.  Then I spent what seemed like 40 days and 40 nights bleeding the air from the cooling system. She also got new air filter, fuel filter and did a Mobil 1 change with oil filter. Hilariously, not an hour after telling my wife how proud I was of myself to be going slowly and meticulously and making sure everything was torqued and nothing missing I went and started it without the oil filter in. The car complained immediately of no pressure and after only a few seconds I turned it off and discovered a shit tonne of oil on the driveway. Sigh. I've driven it since and thankfully doesn't seem to be any problems. AND THEN during the test drive a ratchet extension fell into the battery area in the boot and JAMMED right next to the positive terminal and the car body. Like, just touching it made sparks and it was jammed in there. So, almost killed the engine and then almost burned the car to a crisp. Good start. This was the rails under the splash guards. So stoked, she's straight as and super clean. No rust anywhere. There was a heap of caked dirt that I removed but otherwise looked great. All 4 jacking points are perfect.   Next I want to service the gearbox. Sometimes it's a little reluctant to shift up and I'm hoping a fluid change will sort it. I also have 4 new rear subframe bushes. They're as big as a toddler. I'm renting a tool to help put them in. I can't wait for this because its a bit crashy back there at the moment.  
    • Remember when those donkeys kept using freedom units and smashed that satellite to bits on the moon? NASA has their brain switched on and uses the metric system.
×
×
  • Create New...