Jump to content
SAU Community

Recommended Posts

  • Replies 846
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if mine fits you can borrow mine for the day

thank you so much for the offer.

muchly appreciated - we'll be right tho - resoldering bits atm, fixed

found one of the 90mm q45 afm's is broken :down:

so currently soldering wiring plugs directly to stock r32 gtr afm's to make a flawless ecu-afm connection

weather aint looking good for this track day :devil:

might have to invest in some full-tread tyres

rain in Adelaide doesn't always affect Mallala so we should be ok. and "rain" in SA doesn't last for very long (10min?) - wait an hour and the track will be dry again :ph34r:

uh oh...

damn, Ive purchased a dodgy pair of Q45 air flow metres

just wont work no matter how its wired up.

the stocker gtr afms are cactus at the pinout point, might have to cut out the top and solder some wires directly to the connectors

if i cant fix it by mid week means I'll miss my dynotune session; therefore restricted to the stagea

grrr

If you've paid the $200 then yes, that's all that remains. And that gets paid on the day...

That reminds me, the following people have left to pay.

Dave - scandyflick (spoken to me)

Andrew - AMPerformance (money incoming)

Andrew - semislickR32

Martin - HOSTILE

Abe - Aberax (spoken to me)

Glenn - Heslos +1 (money incoming)

Adrian - 4dr Taxi Man (money incoming)

Adrian - rad32 (money incoming)

Do you want to borrow my GTR AFM's Brendan?

thanks so much for the offer

helps me out big time

Ive ordered 1x z32 afm, and will scavenge the z32 afm that is on my stagea and swap that with the working q45 afm.

that'll work

2x z32 afm's for the rb26, and 1x q45 afm for the rb25 (which is tuned via manifold air pressure anyways, afm is used via the piggy-back for voltage readings, clamped via a fuel cut defender)

well, for those thinking about breaking shit on the day, news is looking partly better

my winch is in ;)

now to get the tow hitch done and im set for full recoveries, even onto your hire trailer if need be :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Jap premium will be 100 RON. You should use 98.
    • The exhaust gases are at their highest temperature as they leave the exhaust port and enter the manifold. They cool as they flow through the manifold because they transfer heat to the manifold and the manifold loses heat to the surrounding environment. Thus, inevitably, the exhaust gases are cooler as they enter the turbo compared to when they entered the exhaust manifold. So, yes, the exhaust manifold can easily get as hot as the turbine housing. Having said that, you will generally see the highest temperatures where the exhaust gases have to slow down or they are concentrated into one area - which is usually the collector on the manifold and in the turbine housing, because the gases slam into the metal at those places, increasing the convective heat transfer coefficient and transferring even more heat to the metal than they might just flowing past elsewhere. Exhaust manifold heat shields are a good idea - certainly for the stock manifold they are there from the factory. People seldom have anything like that on a tubular manifold because they are hard to achieve. Some might wrap a tube manifold with fibreglass tape - but this has a reputation of leading to cracked welds. The best case is generally to put ceramic coating onto the manifold to prevent it getting as hot (internal coating) and radiating/convecting heat into the bay (external coating). All the real heat from a turbo comes from the exhaust side. The gases entering are at ~800-900°C and the steel/iron gets nearly that hot. The compressor side is only going to heat the charge air up to <<200°C (typically not much more than 100°C). So that's nothing, by comparison. The compressor is not a significant source of engine bay heat.
    • Late to the party, specifically joined this forum as I just bought one of these and this thread has been a gold mine of info. If the OP is still around, mind if I ask what gas you been putting in yours? Mine has a Japanese sticker in the cap saying premium but it seems to get way worse mileage on premium (95) than 91. I always thought it was meant to be the other way round🤷 I do think Nissans claimed "6l/100km" is a bit fantastical 😂
    • Does exhaust manifold get hot as turno exhuast side? I have a turbo cover to managr heat in the engine bay but  nothing is covering the exhaust manifold before turbo   i know as turbo does compress air, the temp does go up however does that mean exhaust manifold would be as hot?
    • It's excellent but I'm still breaking it in so I'm not 100% sure where it'll end up. I would say it's about 15% heavier than stock and the smoothness of the slip zone is quite progressive but you need to be a little patient compared to stock or it'll bite hard and stall. Stock I got away with absolutely horrid clutch control. Like I said before I couldn't even tell where the clutch would grab when it was stock so releasing way too quickly without enough revs it would just slip and the revs would drop lower than ideal but that would be the end of it. Currently there's a bit of a nasty clutch judder if I don't apply enough revs + find the exact wrong point of the slip point in the clutch pedal but it feels like it's slowly resolving as I drive it more. I would not recommend the competition clutch unless you really need the extra clamp force. I think this clutch combined with the Nismo operating cylinder is going to be exactly what I want. Enough bite that you need to remember the release point to avoid stalling or rough shifts, but progressive enough that it's not hard to drive by any means and not heavy at all. I tried a "super single" clutch on my friend's 997.2 Turbo 6MT and that was absolutely horrid. It runs an electrohydraulic power steering pump for the clutch power boost so there's zero feedback in the clutch pedal and there was a horrific clutch shudder well after break-in due to the lack of marcel springs or hub springs in the friction disk. It felt like the slip zone was the thickness of a single toe twitch as well so it was almost impossible to avoid stalling it unless you gave it a ton of revs and just dumped the clutch instead of trying to be smooth with it. I was terrified of pulling out in front of traffic. I have also tried some kind of "super single" on an EK9 and that makes this twin plate Coppermix look like a stock clutch. Releasing the clutch pedal even slightly too quickly feels like you're getting rear-ended. The pedal is extremely heavy as well and there's no vacuum assist like the GTR.
×
×
  • Create New...