Jump to content
SAU Community

Recommended Posts

Hi guys!

After 6 or 7 weeks of my car being off the road due to a blown turbo it is finally back!

The turbo itself is an equivalent to a GT3060 with a journal bearing, which was designed to retain the stock turbo's response but with more power. No more nasty turbo whine!

Of course with these things one thing leads to another, and I ended up having a custom intake made, custom 3 inch mandrel exhaust, and the dump pipe from ebay fitted as well :thumbsup:

So far I haven't had much of a chance to test it out (just driving to work and back today) but once it gets up and going it absolutely hauls ass!

Here's some pictures of the intake and exhaust:

DSC00603.JPG

DSC00605.JPG

DSC00606.JPG

DSC00607.JPG

DSC00609.JPG

Big thanks again Andy and Cam for helping get the rebuild sorted, and to Scotty and Craig for offering their help on how to get the damn turbo out!

cheers, Glenn

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/
Share on other sites

Good stuff Glenn!

Intake looks interesting.... can you get a pic of the back of it where it goes to the turbo by any chance?

Have pics of your turbo if you want them (or want them posted).

Happy to hear it does what you want.

Peak boost is at what rpm?

Nismo suspension eh? Nice isn't it!

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5034912
Share on other sites

Looks good Glenn.

Nice work on the exhaust. Looks to be sitting nice and close to the body.

The intake loos good. mmmmm

We just need to show you how to get a little more air in the front and open up the air box.

Cheers

Andy

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035031
Share on other sites

Yeah Cam post up the turbo pictures if you like, I forgot to take any before I took it to the shop. :thumbsup: I'll get some photos of my busted one up as well.

Peak boost seemed like about 3500, not too sure though. I'll have a better look tomorrow on the way to work :D

And yes I was pretty happy to find out about the nismo suspension when I went over the pits for the initial rego. It's a very good ride without being harsh at all.

I'll try and get some better photos of the intake... it's hard to see exactly what's going on down there. I'll try and wedge the camera down the gap and get a photo from there, might show things a bit better.

I was thinking a cheap powerduct style mod might be the next thing to get done Andy... I know there's a thread somewhere how to do it for $10. Is the stock air filter any good? Or am I going to see some better performance from a K&N panel filter or similar?

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035059
Share on other sites

I was thinking a cheap powerduct style mod might be the next thing to get done Andy... I know there's a thread somewhere how to do it for $10. Is the stock air filter any good? Or am I going to see some better performance from a K&N panel filter or similar?

The K&N is maybe a little better but the I am sure the basics are with 1-2% as good.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035080
Share on other sites

Hey Glen,

Looks good....I like the exhaust.....must be quite with 2 mufflers? Where did you put the cat?

Is the guy that made up the suction pipe willing to make more? If so how much? Does he need the car to make em up?

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035517
Share on other sites

Yeah Cam post up the turbo pictures if you like, I forgot to take any before I took it to the shop. :cool:I'll get some photos of my busted one up as well.

Peak boost seemed like about 3500, not too sure though. I'll have a better look tomorrow on the way to work :P

And yes I was pretty happy to find out about the nismo suspension when I went over the pits for the initial rego. It's a very good ride without being harsh at all.

I'll try and get some better photos of the intake... it's hard to see exactly what's going on down there. I'll try and wedge the camera down the gap and get a photo from there, might show things a bit better.

I was thinking a cheap powerduct style mod might be the next thing to get done Andy... I know there's a thread somewhere how to do it for $10. Is the stock air filter any good? Or am I going to see some better performance from a K&N panel filter or similar?

:P I think you mean "I'll get some photos of THE busted up turbo before I send it back to Andy", yes?

3500rpm sounds good.

Just interested to see if there are 2 90degree bends in the intake or what he has done at the bottom.

Turbo pics (basic pics taken, but you get the idea)

Standard turbo

NM35turbo2-1.jpg

NM35turbo3.jpg

GlennM35 highflow

IMG_1715.jpg

IMG_1716.jpg

IMG_1717.jpg

IMG_1718.jpg

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035683
Share on other sites

Ahh looking good! glad everyone likes these dumps! pity i think they are all finally gone however and i still dont have mine :P

cant wait to do similar things to my m35 after i finish jumping out of helicopters in Alaska :cool:

Andy. you've got a good choice for when your over there now! every resort on the east coast or in the middle of the us is pumping :P

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5035749
Share on other sites

Where did that damn CAT go..........

dead%20cat.jpg

Just kidding :P

Yeah there's no cat atm.... but I've decided to get one put on. probably in a couple of weeks after I evaluate whether I like how noisy it is or not. Too much boominess around 1500-2000rpm, which sucks driving at 80kph.

Cam, tried getting some pics of the intake just then but the engine is still too hot to get my hands near it and I have to go out, but definitely tomorrow!

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5036910
Share on other sites

Here's the old turbo:

DSC00618.JPG

Doesn't even look like 1 fin is still intact.

I did a little bit of testing on the way home last night. Boost starts building a tiny bit around 2200rpm but really doesn't get going until 2500rpm. At that point it picks up very quickly and seems to hit full boost around 3500rpm. If I had a boost gauge I could confirm if it maintains boost until redline but I can't see why it wouldn't be, it certainly feels like it does.

Drivablility is still a bit of a concern. It takes a little bit of dancing with the right foot to get medium levels of acceleration, because the car is either bogged down at 2000rpm or hauling ass above 3000rpm. Most notably driving around suburban streets and 60 zones can be a pain to get to the speed limit without either taking ages or looking like you're in a street race. I live in a hilly area and trying to get to 60 and stay there is hard with the gear in 'D' while going up a hill. It will just take some practice I guess. Don't get me wrong though, I'm still preferring bucketloads more power than worrying about this slight niggle.

Is there any way to reprogram when the gearbox shifts/downshifts gears and under what load? Is this possible with an aftermarket ecu or p.i.ggyback? Or will it be a parameter that can be changed once reflashing the stock ECU becomes available? If possible I think this minor problem could be programmed to go away.

With the suction pipe I couldn't even see with my own eyes exactly which direction it goes in... I need one of those little cameras on a bendy stick that seem to always get used in the movies. I'll give the mechanic a ring tomorrow and ask if he can explain somehow...

Also about getting other pipes done, he said that he'd have to have the car to fit it - there wasn't much clearance, as low a 5mm in some parts. On the other hand, he mentioned the idea of sending my pipe off to get exact duplications made. Not sure of the quantity required and cost involved in doing that though. And I've paid for the job but still haven't got a copy of the invoice yet, but I'll ask how much labour was involved in making the pipe.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5039030
Share on other sites

To the best of my knowledge there is no turbo with this designation. What sort of hp output is quoted for this turbo?

It is a 76mm exhaust and a 60mm compressor wheel.

It was a new one to us also. Not sure on the power put.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5040414
Share on other sites

that still doesn't sound correct.

A GT3076 is most likely to be a 60mm turbine and 76mm compressor and is a 500hp turbo. Capable >300rwkw

There a few 56mm turbines floating around (which have been used on older style IW GT3071's so unless you buy the genuine garrett item there is a bit of mix and match possible.

The turbo looks more like a 2860 aka 2530 so more like 230rwkw but they have clearly machined out a bit for the new turbine.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5040442
Share on other sites

That sounds about right, mine is a similar spec bush core and puts out around that power. Unfortunately the rear housing wont support much more than that. If you go bigger turbine you just gain lag.

I have 4 psi at 2000 revs which is quite good for a 220awkw turbo I think.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5040527
Share on other sites

that still doesn't sound correct.

A GT3076 is most likely to be a 60mm turbine and 76mm compressor and is a 500hp turbo. Capable >300rwkw

There a few 56mm turbines floating around (which have been used on older style IW GT3071's so unless you buy the genuine garrett item there is a bit of mix and match possible.

The turbo looks more like a 2860 aka 2530 so more like 230rwkw but they have clearly machined out a bit for the new turbine.

Most of the highflowed M35's in Sydney have been the 3071 (76 exhaust & 71mm compressor)

It took a lot of questions and pushing to get this size made but it is definitely a 76 exhaust and the compressor is smaller than a 71mm so we are confident the turbo builder has made a 60mm opening.

The stock M35 turbo is too big to use any 28turbo parts.

Link to comment
https://www.sau.com.au/forums/topic/303907-m35-new-turbo/#findComment-5040659
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...