Jump to content
SAU Community

Recommended Posts

Well time has come to sell my car as I'm looking at moving to QLD, I am interested in swaps and cash adjustment my way, Looking at $27,000 o.n.o in no rush to sell, I dont really care if you think the price is to high either have been watching a few S15's come onto the market with less mods for this price. All performance mods where installed at SPG in Hobart, Car get's serviced every 4,000km's at east brook automotive in old Tudor in prospect, Car has just over 100,xxx km's on it will get exact amount when i can. Car is always run on BP ultimate :P Car has been very well looked after while in my possession, cleaned most weekends, The interior is very clean on this car and it get's heaps of looks. Car is very quick as some people can vouch has not been drifted etc. Front bar has a few marks where I was coming out of a drive way, also rear bar has like 3 little cracks it in around the exhaust. If you need to know anything else just ask, PM. Will to drive car to mainland to meet buyer if needed. Well here are a few details of the car

Car as follows

1999 Type R JDM

6 speed Manual

Suspension/Breaks

Nismo Front strut brace

Rear strut brace

Nismo struts

Nismo rear Camber arms

Slotted DBA Rotors

Engine bay

POWER FC D-JETRO

GKTECH Dump pipe

X-Force front pipe

X-Force high flow cat

X-Force Cat back

GTR Intercooler

Turbo tech Boost Controller

Apexi POD

Custom airbox

Blitz hot pipe

GKTECH Dump pipe

Braided oil line

Bosch 040

Greedy induction pipe

Trust T518z turbo

Tune agent manifold

Nismo 740cc Injectors

Nismo Super Coppermix twin plate clutch

Nismo Lightened flywheel

Top stage carbon fibre ABS unit cover

Exterior

20 Inch Koya R1 GT's

Full Pearl White Respray

Rolled Front Guards

Shaved rear boot

Debadged

Flared Rear Guards

M-Sports front bar

Uras rear bar

Uras side skirts

Fibreglass vented bonnet

Tinted windows

Xenon white Headlight bulbs

Smoked Black rear taillights

Smoked Black Side guard indicators

Interior

DRiFT Gear Knob

Leather boot

Full Alarm System with remote start

Silvia floor mats

Sound system

Pioneer DVD 7inch in-dash Touch screen

Polk Audio Splits

Type R coaxils

Kenwood 4 Channel Amp

Dyna mat rear parcel shelf

SDC10109.jpg

SDC10112.jpg

SDC10106.jpg

SDC10110.jpg

SDC10116.jpg

SDC10017.jpg

SDC10005.jpg

SDC10014-Copy.jpg

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/
Share on other sites

  • 2 weeks later...

already had a R34 but all offers are considered really looking for money but if you willing to put money on top that would be ok, but do need fair bit of money so I can make the move. PM me with your best offer

Thanks

Edited by ian_and1
Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5058418
Share on other sites

Hey mate, don't suppose your interested in a swap for a supra, making about 350rwkW, yet to be dynoed, nearly $15k in receipts, nothing dodgy, got the car cheap and fixed it up off a mate who hit financial troubles building the car, haha.

Straights swap ill just keep my recaros cause im after 28K for mine let me know if your interested.

Also wouldnt mind keeping my rims as they have no rubber just put on them, so ill keep my 18's you can keep the 20's? let me know, same boat as you, no rush.

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5064006
Share on other sites

  • 3 weeks later...
hey mate PM me details and pics

Hey mate I dont have enough posts to send PM's if your still interested PM me at orange_opponent777@hotmail.com or call me on 0439 318 110

Car is currently getting put back to factory kit and sprayed but will come with everything spare that I have.

Needs a tune too, its been driven to the shops twice in about 6 months due to loss of license, ha.

Link to comment
https://www.sau.com.au/forums/topic/304058-s15-type-r-jdm/#findComment-5104360
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...