Greddy Intake Manifold Questions. Coolant Bleeding And Tb Bracket

[MoogLe]

So i was wondering, how am i supposed to bleed my coolant system with the greddy IM installed?

In none of the isntallation guides was there any mention of how to hook up the bleeder valve

also, what kind of brackets has everyone used to be able to use the stock r33 throttle cable?

[axe s]

I ended up using a VL cable... i just bled mine the old fashion way,

put the car on an incline...

Edited January 15, 2010 by axe s

[89CAL]

mine has the stock bracket for the throttle cable that came off the stock plenum. Just have to bend it and play around with the throttle cable to get it to work. It sits at a bit of a funny angle but it still works.

As for bleeding, the highest point of your cooling system should be your top tank of your radiator. I just bled mine by running it till the thermostat opened and topped up till full. It takes a while

[axe s]

Yeah it seems like some cables are a little longer... mine was about 15-20mm to short... i could get it to reach but it was really tight... i followed the instructions on the greddy instruction manual but to no luck...

i just like to put mine o an incline to be sure..

[woolls]

You can still hook up the bleeder, Have a look at this link, shows you how to do it.

http://www.skylinesaustralia.com/forums/to...html&st=160

[r33cruiser]

Head down to your local autobarn. Say that you want a ''GReddy throttle body adapter for rb25det''.

The kit comes with an adapter to fit your stock t/b, but most importantly, it comes with a pre-fabbed bracket for your throttle cable.

[MoogLe]

Head down to your local autobarn. Say that you want a ''GReddy throttle body adapter for rb25det''.

The kit comes with an adapter to fit your stock t/b, but most importantly, it comes with a pre-fabbed bracket for your throttle cable.

too bad i dont live in australia lol

[MoogLe]

You can still hook up the bleeder, Have a look at this link, shows you how to do it.

http://www.skylinesaustralia.com/forums/to...html&st=160

wools i checked out the picture.

problem is i will be running a non watercooled turbo so that diagram wont work for me

guess i'll just have to get a radiator breather tank