Jump to content
SAU Community

Rust Free Coupe


Recommended Posts

Thought I'd post a couple of pics. My car has now had all visible rust removed with lots of new steel put in it's place. These pics are at guide coat stage, and it is smoooooth. Near all imperfections gone. New steel welded in around the boot, that strip that holds the boot rubber in place.Should be finished in two weeks. New colour: Bondi Bleach. New number plates: BLEACHED AS

post-44326-1263605865_thumb.jpg

post-44326-1263605942_thumb.jpg

post-44326-1263606075_thumb.jpg

Link to comment
Share on other sites

post-44326-1264337979_thumb.jpgpost-44326-1264338178_thumb.jpg

The job so far. Also all other bits like flared guards, light surrounds and garnish are gloss black. Pick it up on Tuesday and should be assembled by Thursday. Then it's off to Bali, me that is for 6 nights.

Link to comment
Share on other sites

Hi Drew, yeah I still want to swap something into it. I just know the L28 isn't going to give me the HP I want. It has to be boost or V8. V8 seems the easiest as there's no injection to set up and I have the go ahead from the Dep of Planning and Infrastructure here in W.A. I love V8s' and love me coupe, so? That 210 at Jollys' has the RB30 in it, now if I could get the relevant bits and pieces, mounts, gbox crossmember, I'm assuming it's had a RB box in it and that's why it's gone. Plus any special looms that have been made up, this could alter my thinking. I just want easy or easiest.

ANYBODY WANT TO TAKE A LOOK AT IT FOR ME? I pay by the hour. Message me if doable please.

Link to comment
Share on other sites

Geez Ricky

I don't think a V8 would be a good idea mate.(IMHO)

L28 with tripple webbers would sound so cool with plenty of HP and be in keeping with the rest of the package.

Failing that stick with an RB20 or 25.

Looks great so far :D

Link to comment
Share on other sites

Andrew, I actually have a friend who is trying to sell me a L28 turbo set up.54/P90 Microtech computer, sequential injection, brand new ball bearing turbo( large), motor is fully rebuilt, and comes with plumbing but to suit a Z. It's 8.5 compression and running low boost. Has already had 240hp@TW and is apparently good for up to 280 + some. Problem is the price, he wants my motor and another 8 grand, this is the installed price but it's just a bit exy. Would be nice to stick with a high HP old school motor.

Todat I'm going to compression test that 308, he wants $800 for it.

Link to comment
Share on other sites

post-44326-1264678243_thumb.jpgpost-44326-1264678628_thumb.jpgpost-19495-1125201912.jpgStill needs a buff and the new rear flared guard put on. But the paint certainly improves it. I'll get the front springs cut to lower it a bit more soon. Oh and of course put the bumper back on. It's not a show car paint job, once buffed it'll look heaps better as it has a few blemishes here and there but it was noly $2500 and a lot of new steel went in to replace the rust and my patch ups. Overall I'm pretty happy with the outcome and it is the first car my mates painted in about 8 years.

post-44326-1264678791_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...