Jump to content
SAU Community

Recommended Posts

Hi, im building a RB30/26DETT with the RB26 intake manifold.

I've kept the IAA/AAC valve unit from my RB25 and was thinking of using that instead of buying the whole rb26 unit.

Now i need help identifying a certain part, its placed on the hose running from the AAC unit to the intake also if its needed for it to work! I havent still got the RB25, sold it a while ago without thinking i neede anything else off of it :S

Hope you can help me with this, heres the part :P

post-25855-1263660743_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/304232-what-is-this-part/
Share on other sites

that ones for cold start idle up. i think its called the IACV.

it basically just bypasses the throttle body to idle up when the motors cold. its also usually connected to something with coolant flow to warm the air up. yet on alot of SRs ive fiddles with ive removed the coolant related parts to eliminate hoses and havent had a problem yet.

tho if the RB26 uses one of these make sure you put one on lol, the RB25 one should be identical they look the same on about 10 different motors ive seen.

GL

It provides additional intake air for cold start. It contains a "gate" connected to a bi-metal strip that is electrically heated (the plug on the LH end in pic). As it warms up, the "gate" closes, cutting off the additional intake air.

It would have been so much easier if you said that i could easily do without it :D Specially since im going to run ethanol and 1600cc's, sounds like i should be ready to get me one if its gives me a hazzle starting it cold :P

Thanks mate!

Guess ill be skipping this one if it only has to do with preheating the AAC since i want to keep the engine as 'bare' as possible :P

sorry if i wasnt clear, as stated above it allows air to bypass the throttle body to idle up the motor without additional throttle. it is needed for the car to run smoothely on cold start. yet the part which seems to have confused you is that some motors have a coolant line connected to it also, to warm it up, which IMO is not necessary. BUT the valve itself is.

GL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...