Jump to content
SAU Community

Recommended Posts

you probably have too much 'loud pedal' fun with it or drive it most of the time sitting in traffic jam.

with gentle , nanna style driving to and from work in daily traffic jam, I made 13.1 to 13.3ltr/100km average or around 7.64~7.5 km/ltr

so your figure isn't awfully too bad.

over the quiet Xmas & NY period I made 12.9ltr/100km or around 7.75 km/ltr

So yours 7.8km/ltr that is 12.8 ltr/100km - MUCH BETTER ECONOMY THAN MINE!

what are you complaining about?

How to read original (non-Xanavi translated to english) consumption figure (the Japanese way):

The higher the number, the better the fuel economy. It is in km/ltr. more kms per each litre of petrol = better fuel economy.

how to read Xanavi translated to english consumption figure (the Australian way):

The lower the number, the better the fuel economy. translated software version is now in ltr/100km. less litre used for each 100km travel = better fuel economy.

Just did my first tank of fuel.

Did two trips from Brisbane to Burleigh heads (about 350-400km total) and the rest was regular town driving but that included a fair bit of heavy foot driving seeing what the car has got.

So this arvo at pump I put in 57 litres, and I had done over 550km's since the last time it was filled.

10.3 litres/100km :laugh:

7.8Km/L for urban driving seems average from what I've read in this section...

I get about 8-9km/L around town, though I never drive in any form of 'peak hour traffic'. On the highway it's usually about 11-12km/L, my best was a Christmas day trip last year Syd to Melbourne, I got about 13.5Km/L for the trip and nearly made it to Melb on one tank! (For the first time I can remember I was glad for all the Police presence keeping me to the speed limit... I discovered how much better economy you get sitting on only 100-110kmh, go figure?!).

Oh and I get about 2.8-3.1km/L on the track (assuming the trip computer calculates correctly) and that's giving it as much loud pedal as the circuit allows!

Not sure if MT vs AT is something to consider in this discussion? Mine is MT

Oh and I get about 2.8-3.1km/L on the track (assuming the trip computer calculates correctly) and that's giving it as much loud pedal as the circuit allows!

2.8-3.1 on the track - wowser!

I was getting about 4.1 on Sandown.

post-55164-1263801180_thumb.jpg

This photo was taken after a recent highway trip, just after i filled up, ended up getting 900kms from 75 litres.

regularly get around 10.5km per litre according to the fuel consumption screen, and thats back up at the bowser with 60 litres getting around 600kms.

2.8-3.1 on the track - wowser!

I was getting about 4.1 on Sandown.

Here's a pic from a track day before I got the TopSpeed Pro1 Exhaust fitted... (which seemed to decrease the economy further, or it might have been that I got more confident with the track and was pushing harder in subsequent days?)

post-60966-1263812952_thumb.jpg

I usually get anywhere between 7 km/l to 8.5 km/l depending on traffic. Most of my driving is either short trips in the burbs or the 25km commute to work and back in just (barely) pre-peak hour Melbourne traffic.

Taking the car on a nice long trip this coming weekend so I look forward to seeing how I go with economy. Will finally get to put that cruise control that Chris Rogers did for me to good use use :D

I get around 8.5km/l around town in a 6MT. Almost made it back to Brisbane from Sydney on one tank in 2008 when I first bought the car(900km+). At the other extreme though on my first skid pan day I was almost exclusively in first gear (reving the nuts off it of course) and managed the dubious fuel burn rate of 19 litres for 19km of driving. Could not believe it and now that I am game to tackle it in 2nd gear consumption has improved vastly.

my last Scoresby Fwy trip yields me 9.6ltr/100km with 130-ish km on the odo trip meter and estimated 530+ km still available based on the trip computer's estimation - it is possible to get 600-700km a tank on the 3.5 ltr if I can keep the pace like that (e.g. long trip 6-7 hours non stop)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
    • I couldn't agree more. As an owner of a built high HP skyline, I'd be a hypocrite to not buy a Hummer for the reasons you listed though haha. 
    • Hahaha oh shit! Again!
    • Is this the one? https://jpjdm.com/shop/index.php?id_product=2192&rewrite=nissan-stagea-c34-rear-boot-actuator-assembly-90550-0v000 Might be worth having a look at yahoo japan as well. Though it seems a bit odd. If the motor works itself, other than being noisy, then wouldn't it be more likely that it's an electrical issue somewhere else? And it being noisy does not seem as surprising if it has been chugging away for months  
    • I know this thread is quite old, but I found it, it helped me, but I also wanted to add my experience and troubleshooting finds to the chat for others. I have not been able to open the rear hatch of my 97 Stagea for several months. Figured it had just really sealed itself up over the winter and I would just get to it eventually. Well that day was yesterday. Some time ago, I noticed my battery was going flat all the time. It was frustrating. Then one quiet night in the garage, I could hear and ever so slight humming / grinding noise coming from the back of the car. It was like a really quiet popping sound or something like sand in a very low speed blender. I took off the panels in the back and noticed the noise coming from the auto close motor, so I unplugged it and the noise stopped. And the auto close was disabled. Well, fast forward to yesterday, I tried all the tricks with power and fuse and lock and unlock and I still could open the damn hatch. So I took off the panels from the inside and found the auto lock had engaged and was stuck in close position. When plugging and unplugging the fuse, I could hear the relay clicking. So I plugged the autoclose motor back in, and the damn thing let go. And immediately started making that grinding sound again. This time, instead of just unplugging the motor, I pulled the fuse, thus depowering the relay entirely. I don't have the autoclose feature now, but at least I can open the boot and not have my battery being sucked dead all the time. Not sure what caused the motor to latch when it was unplugged from the system, but I am pretty sure it won't cause any more problems now.  If anyone has a lead on a new motor, please let me know. It's a cool feature that I would like to get back.  Hope this helps.
×
×
  • Create New...