Jump to content
SAU Community

Recommended Posts

hi guys. i need to get my head welded coz i didnt get that bit done when i got it reconditioned coz i didnt know about it even after reading the guide. i just got the oil hole welded and the new vct bit put in the side at the front.

i just need to know exactly what to do so i can tell the shop and get it done asap.

do i just get the extra welded on where the gasket would seal up if there was material there to seal on? will there be enough room for the water to flow properly coz that will block a fair bit of the rb25 hole up?

should i get the bit where it overhangs inside abit where my finger is in it reshaped like the pic of it with the black line on it to make abit of extra room to flow? i didnt look too hard but i think it will be ok. do people do that or is it bad for some reason?

feel free to help me out and even do a mspaint job on it to explain it properly if you can for me please.

heres the pics ive got. hopefully il get an answer quickly so i can get it done and put the motor together finally.

post-34298-1263823422_thumb.jpgpost-34298-1263823238_thumb.jpgpost-34298-1263823254_thumb.jpgpost-34298-1263823269_thumb.jpg

thanks

Edited by joe blo
Link to comment
https://www.sau.com.au/forums/topic/304470-rb25-head-water-hole-welding/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You see R34 GTRs listed for 200-300k are they really selling for these prices? Kinda seems like the same ones listed all the time. Even with R33 GTSTs looking at gumtree. You have an auto with a bitsa interior for 35k. Another one needs an engine rebuild and asking 24k. And then you have a stock in better than average condition for 45k. Nobody is ever going to pay these prices.
    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • Shall we... wake you up when September ends?  
×
×
  • Create New...