Jump to content
SAU Community

R32 Gtst With Gtr Bonnet?


chalky
 Share

Recommended Posts

iv had a smash in my r32 gtst type m, hit a kangaroo, smashed the shit out of the bonnet.. ive been wanting to put a gtr bonnet and grille on for ages so now i have an excuse! =D

If i was to put the bonnet on will it fit direct n sit flush with the gtst gards or will i also need gtr gards??

Link to comment
Share on other sites

The only bits you need are the bonnet, bonnet latch and the latch support panel. My car already had GTR headlights so my grill just clipped on.

Edited by DSTROY
Link to comment
Share on other sites

oh.. i thought the gtr bonnets sit abit further up than the gtst's?

No its a perfect straight swap with the hinges. but you will need the folded metal upright that bolts i think from the radiator support rail to the bottom of the radiator. If you don't know what i'm talking about then pop your bonnet and it is the thing that the bonnet latch & horns bolt to. You just remove everything from it and bolt it up to the gtr one. You may need to undo the plastic splash tray under the car (if it still has one) to obtain easier access to the lower bolt. You may need to mount the horns facing the other way and bend the latch down in a vice or something to clear the gtr grill. Well i did anyway. If you can't find a gtr bonnet that comes with the upright then haggle on price because its not worth as much on the market IMO.

Link to comment
Share on other sites

No its a perfect straight swap with the hinges. but you will need the folded metal upright that bolts i think from the radiator support rail to the bottom of the radiator. If you don't know what i'm talking about then pop your bonnet and it is the thing that the bonnet latch & horns bolt to. You just remove everything from it and bolt it up to the gtr one. You may need to undo the plastic splash tray under the car (if it still has one) to obtain easier access to the lower bolt. You may need to mount the horns facing the other way and bend the latch down in a vice or something to clear the gtr grill. Well i did anyway. If you can't find a gtr bonnet that comes with the upright then haggle on price because its not worth as much on the market IMO.

oh. cool thanks for that. i always thought it was the hinges that needed changing. haha, atleast i know now. thanks.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
    • Here's the torque curves from the car I ramped boost up later in the rpm to allow a slightly wider useful power curve - the power curve is a bit weird shaped also thanks to the TVIS (or whatever they call it with the 4EFTE in this Starlet) which changes the volume of the intake manifold throughout the rpm range, but you can see that the green power curve actually holds later on with the extra boost... but looks almost more like the kind of thing you'd expect from a cam or exhaust change
×
×
  • Create New...