Jump to content
SAU Community

R32 GTST owners - Did you know...

TTT

By TTT,
in Engines & Forced Induction

 Share

Recommended Posts

  • 8 months later...
R33vit Experienced

R33vit

Posted
Posted
has anyone found out if this is actually possible with the r33 rb25det pfc on the r32 rb20det??? I'd love to know if its true or myth!

Cheers

I have the datalogit software for RB25det which covers the following PFC's

RB20DET

RB25DET

RB251PRO

The interface and software are the same but the maps are not. So if you think you can just plug it in and away you go you would be wrong. You will need the default map to start with in a RB20DET which would be different to the Default map for a RB25DET

Link to comment
Share on other sites
Cubes Grand Master

Cubes

Posted
Posted

I may test this out soon ppls.

The RB30DET won't run on the stock RB20DET maps, I assume this is due to the head being a RB25 (bigger valves/ports etc).

From what I've heard the RB25DET ECU will run the RB30DET with no problems.

All I have to do now is try to find some one with a R33 PowerFC willing to do the test.

Link to comment
Share on other sites
xRHETTx Mentor

xRHETTx

Posted
Posted

Does that mean it would be fine, as long as you tuned it carefully straight away?

If true, this would be great news, as the R32 Gtst PFC is still worth about $2000 new. (compared to R33 at about $1100)

Link to comment
Share on other sites
R33vit Experienced

R33vit

Posted
Posted
Does that mean it would be fine, as long as you tuned it carefully straight away?

If true, this would be great news, as the R32 Gtst PFC is still worth about $2000 new. (compared to R33 at about $1100)

Id say you will need the default's which the RB20DET PFC comes with for it to work. There is more to a PFC than just Ign & Inj map's. If we can get a R32 PFC on a datalogit laptop and then save the default's and use them in a R33 PFC on a R32 in theory this should work. Although if you ever needed to do a PFC reset the maps would default back to R33.

Be interested to see if SK has anything to add to this thread.

Link to comment
Share on other sites
yogi000 Mentor

yogi000

Posted
Posted

I was looking on nengun and greenline they're about 1300-1400approx landed. Thats the AP engineering model (low impedence injectors only), only the ECU, no hand controller.

But if the r33 works, it makes things heaps easier, since theres more floatin around.

Link to comment
Share on other sites
Roy Grand Master

Roy

Posted
Posted
Does that mean it would be fine, as long as you tuned it carefully straight away?

If true, this would be great news, as the R32 Gtst PFC is still worth about $2000 new. (compared to R33 at about $1100)

If you look at the pins on the R33 ECU a few of them dont match the R32 wiring, so there is definitely a need to fiddle with wiring to get it working. If it woks, but i suspect it can be made to work, but not positive

Link to comment
Share on other sites
R33vit Experienced

R33vit

Posted
Posted
Be interested to see if SK has anything to add to this thread.

Or in this case troy

If you look at the pins on the R33 ECU a few of them dont match the R32 wiring, so there is definitely a need to fiddle with wiring to get it working. If it woks, but i suspect it can be made to work, but not positive

I guess that means the ECU's have different looms and I would'nt fark with it.. If you blow a PFC, $2000 for the specific model would of seemed a sweet deal

Link to comment
Share on other sites
Roy Grand Master

Roy

Posted
Posted

I had a hang up that i wanted to use the Pro which isnt available with the R32 so looked into it.

But some things to consider,

For:

- injectors same impedence

- coil packs are interchangeable between engines

- both from the same RB family

However:

- its a big assumption to assume that things like water temp, idle control valves etc are all 0-5V or same resistances and therefore compatible

- some of the injector pins dont match up in the plugs but majority of wires do.

If an R33 owner went RB30 it would be interesting to see them have a play with a re-mappable R32 ECU in their car, if a bit of a play means you can tune the RB20 ecu to run it then i would be more confident in plugging in the $1500 Pfc into an R32 and seeing what works/how it works

Link to comment
Share on other sites
funkymonkey Grand Master

funkymonkey

Posted
Posted

hehe Series 1 R33's used a PTU to control ignition, series 1.5 and Series 2 had the PTU included in the ECU... now... RB20's don't have VVT like later model RB25's... do the maths, its not simple just plugging in a Rb25 Power FC.

However, if one was to trick the power FC into thinkiing it was running a really early model RB25DET then that should work just fine. End result... its a lot easier to find and buy an AP engineering power fc anyways.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Count Grantleyish
      Vic Wasteland Thread - 15.0

      By Count Grantleyish · Posted

      People still have Skylines? I thought they're non-existent now. 
    • pogman
      George's R33 GTST build

      By pogman · Posted

      Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • GTSBoy
      Hello Everyone

      By GTSBoy · Posted

      They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • Triple OG
      Hello Everyone

      By Triple OG · Posted

      I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...