Rb26dett Coolant Routing Questions.

[TurboSE]

RB26DETT coolant routing questions.

The basics:

No heater.

Grex remote oil cooler/thermostat plate.

Do 1 and 2 have to be connected if I'm deleting the heater and running a thermostat plate? Is there a way for the coolant from the rear to get to the neck internally? Can 1 and 2 be blocked?

If they must be connected, what is a good size tubing or hose to use?

[T04GTR]

they dont have to be conected to anything, but helps if they are just joined by quicker warm up and better coolant bleeding.

also if you are running a water cooled turbo, that where you can rout them..

if joining normal 5/8 hose is ok.

[TurboSE]

they dont have to be conected to anything, but helps if they are just joined by quicker warm up and better coolant bleeding.

also if you are running a water cooled turbo, that where you can rout them..

if joining normal 5/8 hose is ok.

If running a water-cooled turbo, just run #1 into the turbo and #2 out of the turbo?

[TurboSE]

could I tap one of these for my water temp sender?