R32 Gtr Digital Clock

[GTRAAH]

Does Anyone know if theres a fix for them? they are too expensive brand new from nissan

[nismo32gtr]

Ive heard something about the solder inside of them going dry or something like that, then what happens it dosent let the power through .

apparently if you pull them apart and resolder them it sometimes gets them working. not to sure if its true just something i heard from a mate. Mines currently not working to how much did nissan qoute you for a new one ?

[NISMO]

Try wreckers. I was looking for the plastic surround cause mine had a whole cut above the clock for a boost controller. I lucked out and got a surround and a working clock for $40!!

[GTRAAH]

Ive heard something about the solder inside of them going dry or something like that, then what happens it dosent let the power through .

apparently if you pull them apart and resolder them it sometimes gets them working. not to sure if its true just something i heard from a mate. Mines currently not working to how much did nissan qoute you for a new one ?

$280 brand new LOOL its the smallest of little things, I cant beleive how much they go for. All i can say is GTR

[GTRAAH]

Try wreckers. I was looking for the plastic surround cause mine had a whole cut above the clock for a boost controller. I lucked out and got a surround and a working clock for $40!!

Wow you got lucky? how long ago was this? i would think there all gone by now.. although i have never tried a wrecker only thinking that there will be no luck

[Jez13]

Very common problem it seems. Mine doesnt work either and it pisses you off. I am going to crack it open this weekend and try a re-solder. Will let you know how I go. I even remember something about if you punch too much boost through your car it deliberately fries the clock so the Nissan dealership knows that you have tampered with the boost and voids warranty. Probably a myth though because it sounds far-fetched.

[GTRAAH]

Very common problem it seems. Mine doesnt work either and it pisses you off. I am going to crack it open this weekend and try a re-solder. Will let you know how I go. I even remember something about if you punch too much boost through your car it deliberately fries the clock so the Nissan dealership knows that you have tampered with the boost and voids warranty. Probably a myth though because it sounds far-fetched.

Yeh that does sound about funny i doubt they would do that, i mean that car was worth over 100 grand when it came out i would think they wouldnt care what you do with it after its gone. PLEASE let me know as i have the dash pulled apart and i would like to figure it out before i put it back together this weekend. thanks bud

[NISMO]

Wow you got lucky? how long ago was this? i would think there all gone by now.. although i have never tried a wrecker only thinking that there will be no luck

Only about a month or so ago. Just ring up places that bring half cuts in. Thats what i did, and yep a bit of luck :-)

[GTRAAH]

Hey Jez did you got it working?

[willL]

have this exact problem as well, although mine comes and goes as it pleases. very annoying because whenever i want to know the time its off and every other time its on....

would also like to know if anyone is able to fix it and what part needs soldering

[gwin]

lol

yea mine doesnt work either, havent bothered checking the fuses yet. Guess it would be the same problem then.

but my headunit has the wrong time, so that helps in a way.

[xiaorpowr]

yeah man let us all know how the soldering goes

[my_gtr32]

Yeah, mine too. tried resoldering my old one but it still had a mind of its own. Purchased another surround which came with a clock, bit it too has failed. Same fault. Works sometime, then stops. It does keep the time so its a display fault or accessory power related problem. I give up on these.

have this exact problem as well, although mine comes and goes as it pleases. very annoying because whenever i want to know the time its off and every other time its on....

would also like to know if anyone is able to fix it and what part needs soldering

[lot843]

try panel house in slacks creek

[bozodos]

I thought every R32 had a digital clock? lol

[Bozz]

Mines packed it in. I suspect the surface mounted IC or the VFD has died, if so, we're all up shit creek.

Does anyone in Melbourne have a working clock that I can use for testing and try figure out what's wrong with them?

I've replaced the usual suspects, the surface mounted 10uF capacitors and it didn't fix it. I want to compare a dead and working one side by side and establish if they can be repaired.

Cheers

[Bozz]

Nevermind, I've found and fixed the problem. I saw in another thread people were saying the clock is detecting overboost, haha what a load of shit.

Anyway, there are four surface mount 30 ohm resistors in series to dissipate some heat under the Vacuum Fluorescent Lamp, they dry joint. Very risky to remove the VFL since it's glass and painfully easy to break. If you chip it, it's dead....

Took a couple of hours but I've fixed it, including the unnecessary removal of the SM IC to find out what it was (OKI M5547, datasheet here if anyone wants it: http://www.alldatasheet.com/view.jsp?Searchword=M5547 )

Hope it gets a few of you out of trouble

[gwin]

My VFL burned out, it was the OLED back in the days. No point trying to find a replacement screen, my clocks turned into a big black hole

[flipridah17]

When mine burned out I just took it out an left it blank

[Samuel Leonard]

Nevermind, I've found and fixed the problem. I saw in another thread people were saying the clock is detecting overboost, haha what a load of shit.

Anyway, there are four surface mount 30 ohm resistors in series to dissipate some heat under the Vacuum Fluorescent Lamp, they dry joint. Very risky to remove the VFL since it's glass and painfully easy to break. If you chip it, it's dead....

Took a couple of hours but I've fixed it, including the unnecessary removal of the SM IC to find out what it was (OKI M5547, datasheet here if anyone wants it: http://www.alldatasheet.com/view.jsp?Searchword=M5547 )

Hope it gets a few of you out of trouble

How hard is it to get the clock out? And is there a tutorial on this? Would love to take my clock apart but not game until I can see it step by step... If you could make a quick one that would be awesome!