Jump to content
SAU Community

R34 Pop Up Dash Screen

BJV

By BJV,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

BJV Enthusiast

BJV

Posted
Posted

Like the title says, does anyone on here own/owned an R34 with the pop up screen on the dash where the 3 center gauges or fixed mfd goes in the GTT and GTR? This one;

post-53546-1264052906_thumb.jpg

How does it turn on? Is there like an on/off switch? Is it wired into the ignition or Do you need the factory head unit to activate it? (make it pop up and turn on)

Does anyone know how the get the signal to the screen? RCA plugs ect.

Does the screen work similar to the fixed GTR screen as far as wiring work? I've found heaps of infor on here about the GTR screens but very little about the units I'm talking about.

I'm looking at doing a conversion in my car and hooking up a car pc to it. If anyone here had done this I'd love to hear from them or anyone in the Newcastle area that I could actually see working first hand would be fantastic.

Cheers in advance guys.

Link to comment
https://www.sau.com.au/forums/topic/304899-r34-pop-up-dash-screen/
Share on other sites
Carbon 34 Grand Master

Carbon 34

Posted
Posted
Like the title says, does anyone on here own/owned an R34 with the pop up screen on the dash where the 3 center gauges or fixed mfd goes in the GTT and GTR? This one;

post-53546-1264052906_thumb.jpg

How does it turn on? Is there like an on/off switch? Is it wired into the ignition or Do you need the factory head unit to activate it? (make it pop up and turn on)

Does anyone know how the get the signal to the screen? RCA plugs ect.

Does the screen work similar to the fixed GTR screen as far as wiring work? I've found heaps of infor on here about the GTR screens but very little about the units I'm talking about.

I'm looking at doing a conversion in my car and hooking up a car pc to it. If anyone here had done this I'd love to hear from them or anyone in the Newcastle area that I could actually see working first hand would be fantastic.

Cheers in advance guys.

search in the car audio section, there is a 30 page plus write up on them

close thread

joshguy Enthusiast

joshguy

Posted
Posted
Like the title says, does anyone on here own/owned an R34 with the pop up screen on the dash where the 3 center gauges or fixed mfd goes in the GTT and GTR? This one;

post-53546-1264052906_thumb.jpg

How does it turn on? Is there like an on/off switch? Is it wired into the ignition or Do you need the factory head unit to activate it? (make it pop up and turn on)

Does anyone know how the get the signal to the screen? RCA plugs ect.

Does the screen work similar to the fixed GTR screen as far as wiring work? I've found heaps of infor on here about the GTR screens but very little about the units I'm talking about.

I'm looking at doing a conversion in my car and hooking up a car pc to it. If anyone here had done this I'd love to hear from them or anyone in the Newcastle area that I could actually see working first hand would be fantastic.

Cheers in advance guys.

wow thats awsome! i want it! haha never seen it xD

BJV Enthusiast

BJV

Posted
  • Author
Posted
I don't.... it used to pop up or down whenever it felt like it lol

Then my battery died and when you disconnect the battery it kills your head unit/s so now it just stays down.

Lol fair enough then. Can you get the screen fixed?

Shell Grand Master

Shell

Posted
Posted

I don't know :down: I'd like to use it for something, but I haven't looked into it, except to read what info's on here which seemed to be different for each case so no real standard answers on what's possible and what's not.

You at least have a Nissan logo... I just had the blue screen of death haha... you might have more luck than me :P

I just want to be able to play music again... the bottom HU died when the battery was disconnected as well :)

BJV Enthusiast

BJV

Posted
  • Author
Posted
I don't know :P I'd like to use it for something, but I haven't looked into it, except to read what info's on here which seemed to be different for each case so no real standard answers on what's possible and what's not.

You at least have a Nissan logo... I just had the blue screen of death haha... you might have more luck than me :thumbsup:

I just want to be able to play music again... the bottom HU died when the battery was disconnected as well :P

Nah that one in the photo isn't mine, I'm looking at tracking one down.

Adrian P Community Regular

Adrian P

Posted
Posted
Intersting, is it motorised or spring loaded?

Motorised. Im interested if anyone has any idea of the wiring pins on the back of the tv unit (the big plug and the small 5 pin plug). All i want to know is can you make it open & close without the control unit - just suppling power to those pins.

BJV Enthusiast

BJV

Posted
  • Author
Posted
Motorised. Im interested if anyone has any idea of the wiring pins on the back of the tv unit (the big plug and the small 5 pin plug). All i want to know is can you make it open & close without the control unit - just suppling power to those pins.

You can find some of the wiring diagram on here if you search for it long enough using the screen model as the keyword but what you wont find is that you need the unit just to get the screen to work at all.

BJV Enthusiast

BJV

Posted
  • Author
Posted
PM Chris Rogers.. i'm sure he can do something with some of them (from memory) but if he cant then no one can lol

Yeah that's what I ended up having to do. He basically said what I posted before; You can make them raise and lower but not much else.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

works off the top navi unit. if that has video output of ANY sort then I can do something with it. thing being everyone is too much of a tightarse to let me try :)

I have a E50 El grand (same system) that has TV/navi on it. there is a big thread on this thing inthe car audio area. I posted up a lot of images on it and gave instructions on how to manually open the thing.

if all you have is the screen then I would suggest ripping it out. you need a data stream to fire it up and set the correct input on it. (it has 3 inputs.) there is no other wqay to make it run.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...