Jump to content
SAU Community

Anybody Notice All The Camera's On The M4 Between The Toll Booth And Church Street Exit?


Recommended Posts

i almost got slammed by a truck behind me because I came up to a 'safety camera' intersection. Hit my brakes because I did not want to go through and risk it, poor truck behind me now has 16 flat spots on his tyres. Then again it was either that or me and my car would look like a jumped on coke can. Makes you wonder if this system is really improving safety..?

I'm not sure if this was implied above but everyone here IS aware (i hope) that these "safety cameras" are constantly a speed camera right...they don't just turn on the speed detection when the lights go amber, its on during green, orange and red. I have seen more then 50 odd people getting flashed when they drive through both the pennant hills safety camera and the safety camera on showground road (as you approach windsor road passing the victoria ave showground rd intersection) also as i have been driving i have seen people in-front of me (who are clearly speeding) getting flashed as they drive through the intersection when its green.

Just thought i would nail in that bit of information for the small few of us who are yet to be informed of these dreaded box's they call "safety cameras"

I'm not sure if this was implied above but everyone here IS aware (i hope) that these "safety cameras" are constantly a speed camera right...they don't just turn on the speed detection when the lights go amber, its on during green, orange and red. I have seen more then 50 odd people getting flashed when they drive through both the pennant hills safety camera and the safety camera on showground road (as you approach windsor road passing the victoria ave showground rd intersection) also as i have been driving i have seen people in-front of me (who are clearly speeding) getting flashed as they drive through the intersection when its green.

Just thought i would nail in that bit of information for the small few of us who are yet to be informed of these dreaded box's they call "safety cameras"

Hiya Aron,

It's all on this thread...

http://www.skylinesaustralia.com/forums/Sa...ng-t300619.html

"SAFETY CAMERA AHEAD" = RED LIGHT CAMERA + SPEED CAMERA

True. All i know is i hate being loaded 10+T (tipper) and approach a traffic light with camera. Lose 3 points and all days earnings in a second. I dont even know weather to go slower than speed limit or do the speed limit while approaching the lights, just to make sure those cheap ass cameras dont snap me up. I dont even pay attention around me, all i do is watch that stupid light. You call that safety? lol I dont think so. Very hard to anticipate. But i guess being in a truck, im in "different cattle of fish".

Try driving a 62T B-Double down p/h road in pissing down rain to see the lights go amber and dickheads in little cars try to dangerously get infront of you so they dont get stuck behind you. Mind you driving 11hrs all night aswell.

Try driving a 62T B-Double down p/h road in pissing down rain to see the lights go amber and dickheads in little cars try to dangerously get infront of you so they dont get stuck behind you. Mind you driving 11hrs all night aswell.

Idiots like that are just asking for it - the problem is that our road safety education doesn't teach people to look out for things like that, so they probably know no better. People using their common sense? 'Sif that will ever happen!

The first thing I do EVERY time I see an amber light is check my mirrors to see if there is either a truck behind me, or someone sitting WAY too close for my liking giving me reason to suspect they won't stop in time to avoid hitting my car if I were to hit the brakes.

Many, many years ago (probably in the late '90's, I can't remember exactly) I got off a red-light camera conviction because I contested the fine/loss of points, due to the fact that at the time I had a truck behind me in my lane, I didn't know if it was empty or loaded, and wasn't sure if he'd be able to stop in time if I had chosen to hit the brakes. It was a downhill section of road, both longer and steeper than Pennant Hills Road, and there was other traffic around, so I couldn't change lanes.

I wonder how many people put themselves in the place of a truck driver or motorbike rider when they're out on the road, or even allows for the abilities (or lack thereof) of other drivers and the vehicles they're in. Who can honestly say that they do?

Try driving a 62T B-Double down p/h road in pissing down rain to see the lights go amber and dickheads in little cars try to dangerously get infront of you so they dont get stuck behind you. Mind you driving 11hrs all night aswell.

I didn't realise you could drive for "11 hours all night". I thought that every 5 hours you had to take 1/2 hour break minimum with a maximum # of hours in any 24 hour period. If your hours of work are making you less able to deal with issues then maybe you should be taking a break.

Dickheads in little cars pulling in front of you and hitting the brakes is a valid complaint. Mow them down by all means and help us all by increasing the average IQ of the country. :)

The length and weight of your truck should not have a huge bearing on how long it takes to slow down. You should have the same ratio of brakes and tyre contact patch per tonne as a guy driving a 12t GVM rigid. The only difference with b-doubles and the like is that it takes you a lot longer to get back up to speed, hence some of the ridiculous "pushing" I see from drivers of heavy combinations.

The length of time a light stays amber is not just some random figure pulled out of a hat. It is based on the upper limit of how long it takes a roadworthy vehicle to stop from the posted speed limit. If you can't physically pull up in time then perhaps the truck is overloaded or underbraked and maybe not roadworthy?

I have spent my share of time driving a horribly underpowered and underbraked truck and I can understand how truckies get frustrated by stupid behaviour. Suggesting these new safety cameras will create a hazardous situation is a bit of a stretch though, IMO.

BTW, the cameras on the M4 between the tolls and Church St were first installed purely to monitor for breakdowns. A sefety audit was done before this section of road was converted from 2 lanes to 3 and the report suggested that the removal of the shoulder created a serious risk of incidents due to stranded vehicles having nowhere safe to go hence the need to closely monitor and respond quickly to breakdowns.

Cheers,

Ben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...