Where Is Plenum Hose In This Picture

[heaveyfoot_ skyliner]

following the topic for boost leak test i am lazy to figure out where exactly the parts are identify the part please .

What you'll have to do is,

1. take your pod and AFM off.

2. use a baked bean can (full) and put it into your rubber intake pipe (assuming its still the stock one).

3. tighten up the hose clamp onto the tin creating a seal.

4. Open the throttle body with a brick on the accelerator pedal, so you can read pressure on the boost gauge.

5. take a hose that is plumbed into your intake between the turbo and the plenum or off the plenum itself.

6. Get an air compressor and pressurize the system through the hose and get someone to read the psi on the boost gauge. you only need about 5psi. you can use the compressors at the servos.

7. Listen for a leak. And use the soapy water in the spray bottle to find exactly where it is if need be.

It is easier to find a boost or pressure leak using this method because the car is not running and is easier to hear and locate.

[GTScotT]

pick a hose, any hose.

preferably a vacuum hose. if your honestly stumped here, are you sure ull be able to find and fix a leak if you cannot identify a vac hose ? lol

im not having a dig at you mate, just being realistic

[32_Dave]

i hope you didnt pay much for that halfcut or you got the image else where.