Jump to content
SAU Community

Recommended Posts

Hey everyone,

I personally removed a set of GTR injectors this weekend and they are up for sale. I know a guy down the road from my place who can professionally clean and flow test them complete with new micro filters and end caps (plus he'll lube them up for install no extra charge) for $100

Asking price is $300 - without flow testing and a clean

Asking price is $400 (duh) - with flow testing and a clean - This is my preferred option as I'll know I won't be stuffing anybody around and you're getting what you're paying for.

Items are located on the East side of Melbourne and I'm happy to meet centrally for those on the West.

If pictures are required please let me know, but all of the injectors are in good condition, no cracks etc

Please reply within this thread or PM if you're interested :),

Thanks lads,

Sean

Link to comment
https://www.sau.com.au/forums/topic/305253-factory-gtr-injectors/
Share on other sites

  • 2 weeks later...
will these fit into rb20det's? are they an upgrade at all?

Hey mate,

Take a squizz at this thread by Roy and let me know if you're still interested :P

http://www.skylinesaustralia.com/forums/Gt...det-t62674.html

Cheers,

Sean

Gday

Im in SA

would u be willing to post if so do u know how much??

Cheers

Pete

Hi Pete,

I would be happy to post them to you, could you please PM me your post code and I'll check with Australia Post how much it will set you back :-)

Cheers,

Sean

  • 3 months later...

Do you mean the small black rubber rings at the top of the injectors? If you are, ask a injector specialist they'll probably only charge ya a few dollars for a brand new set :domokun:

Otherwise if you were after injector seats you can get some from here --> http://justjap.com/store/product.php?produ...8207&page=2

Cheers,

Sean

  • 3 weeks later...

They certainly are mate,

Here are a few pics.....They are a tad dirty because I pretty much took them out and then put them straight into a zip lock bag :bunny:, all working fine though

The lines on the tops of the injectors was from me numbering what cylinder they came out of

P1040756.jpg

P1040760.jpg

P1040763.jpg

P1040769.jpg

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...