Jump to content
SAU Community

Recommended Posts

hi all,

i have just bought myself my first skyline it is a r34 25GT 4 door with an rb25de neo engine and i was just wondering what would be the best cheap and easy modifications to make to get a bit better power and performance out of it? and how to get better handeling and cornering?

cheers Curtis

Link to comment
https://www.sau.com.au/forums/topic/305272-what-modifications-to-do/
Share on other sites

read around in the N/A section, these things have been covered many times.

in a nutshell

-2.5" exhaust

- high flow panel air filter

- 98 octane fuel

- make your car lighter

unless you want to go crazy and spend big money on an NA car. The return on performance parts on NA cars is little.

question 1: are you on your p's and therefore have power restrictions?

if yes, see above. if no, you bought the wrong car to make power from. sell it and buy a turbo version

that is all.

oh and for the handling side of things, get a set of coil overs

question 1: are you on your p's and therefore have power restrictions?

if yes, see above. if no, you bought the wrong car to make power from. sell it and buy a turbo version

that is all.

oh and for the handling side of things, get a set of coil overs

yeah im on p's but live in tassie so it doesn't matter if i have a turbo, its just insurance cost a bomb with a turbo.

and thanks for the advice it is much appreciated

Get a DECENT set of coilovers,you'll be surprised how much of a difference they will make to the overall handling to your car.

As suggested, an LSD is a good option. You'll have to buy an R33 LSD. You can also put R33 GTS25t brakes on aswell.

A decent set of tyres with wider rims will make your car handle nicer too.

I know the GT-V does

yeah, you'd think the four wheel drive does too?? does the GT V have a "SLIP" light?

im asking cos im trying to decide if i can use LSD diff oil when i change the oil, ive posted in the drivetrain section but not much luck there either

if i jacked the car up and turned the wheels... wouldnt an LSD make the wheels turn together and in the same direction??

ive had my GT FOUR fully stuck in the mud once before cos i was parked on the grass on a wee hill and it rained all night, lol, when i was trying to get it out all FOUR wheels were turning together....as if it were LSD

what you guys think?

sometimes a car with an open diff can still spin all the drive wheels. i know my falcon used to at times. other times it would only do 1 wheel. if there is little tracion (like in mud, etc) then it is easy for there to be enough friction in the diff to spin all the wheels. had 1 side been on something with more grip and the other in mud and they had all spun/driven then you would know for sure that it had a LSD. also as an open diff starts to wear out it can often start to spin both wheels more.

No point having extra power when the car handles like shit... Coilovers are a great start, swaybars and strut braces would make a load of difference. Then if any bushes look old or are getting worn then replace them and the car will handle 10x better!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
×
×
  • Create New...