Jump to content
SAU Community

Recommended Posts

hi i have a r32 gtr and for some reason it keeps putting it self into rwd at anytime. the light will come on in the dash and stay on till completely turn it off and then most of the time the light justs comes striaght back on.

Does anyone what is f**ked or is it the cars way of saying do a skid ?

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/
Share on other sites

Could be a number of things.

The reservoir in the RHR quarter, is it full?

What size tyres are you running front and rear?

Have you got a mix of new and old tyres?

Could be a a sensor gone.

Have you got a copy of the workshop manual? there are some good trouble shooting steps in there.

Feel free to arrange a time to head over to Burnie if you want someone to have a look for you.

Always happy to meet another GTR owner and help out if possible.

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5054761
Share on other sites

The tyres are 235/45r17 all round and are the same the car was running for about 4 months befor (stephen corrected me if Im wrong)

My first thought was wheel speed sensor as well but its not throwing the abs light

as for reservoir Ill lol if thats all it is due to the facted that he should be smart enough to have topped that up when he bleed it. but it might not be bleed properly

Edited by lawler
Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5055090
Share on other sites

attessa is very sensitive to earth, and voltage. My car pulled the abs wires into the compresser, which kept blowing the a/c fuse, and also made the 4wd fail. I've heard of people having earthing problems that cause it to fail too.

also when it fails, look at the attessa ecu under the rear parsel shelf, and count the number of led flashes.

Edited by sav man
Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5055356
Share on other sites

When was it bled and does this coincide with the warning light issue???

Its easy enough to bleed, if you know what your doing.

If you dont, then its real easy to get it all wrong as well.

Same way its been bleed the same the other 3 times the gearbox has been out. tho the car has had the whole motor out and has only just got going again. from what he was telling me to day its intermittent and if you stop and turn the car off its fine for a bit then it will throw the light and be in rwd again

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5055372
Share on other sites

thanks for the help. think i have fixed it now. i bleed it again and cleaned all the abs sensors and been driving around all day and it hasn't done it again plus the 4wd seems to kick in quicker

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5055391
Share on other sites

Could be a number of things.

The reservoir in the RHR quarter, is it full?

What size tyres are you running front and rear?

Have you got a mix of new and old tyres?

Could be a a sensor gone.

Have you got a copy of the workshop manual? there are some good trouble shooting steps in there.

Feel free to arrange a time to head over to Burnie if you want someone to have a look for you.

Always happy to meet another GTR owner and help out if possible.

Edited by 32gtrsteve
Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5059170
Share on other sites

Could be a number of things.

The reservoir in the RHR quarter, is it full?

What size tyres are you running front and rear?

Have you got a mix of new and old tyres?

Could be a a sensor gone.

Have you got a copy of the workshop manual? there are some good trouble shooting steps in there.

Feel free to arrange a time to head over to Burnie if you want someone to have a look for you.

Always happy to meet another GTR owner and help out if possible.

started doing it again. are you busy next week or sometime to have a look at it cause i dont konw what to try

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5059177
Share on other sites

Should be free most night next week after about 6pm.

Dont think I have anything planned at this stage for Sunday either... :s

Not sure on that one though.

Shoot us through a PM with your mobile number and we will tee something up.

Link to comment
https://www.sau.com.au/forums/topic/305474-r32-gtr-4wd/#findComment-5060051
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...