Jump to content
SAU Community

Recommended Posts

Hey I’m posting on behalf of a mate

1992 R32 Type-M

5 speed manual

Maroon

170xxxkms

REGO IS EXPIRED but can still be registered.

Selling due because i got in a front end accident and i can’t afford to fix it. What is needed to repair it is new front guards, bonnet, re-enforcement bar, a stock bumper, new front window as it is cracked, new battery, radiator, fan, and an air-flow meter.

WAS NOT A RIDE OFF and FRONT END ACCIDENT WAS NOT AS BAD AS I THOUGHT ENGINE WAS NOT PUSHED OR DAMAGE. Accident happened in August 2009 not that long ago.

Currents mods and stuff:

Front mount intercooler (was not damage in accident piping was not damage i was amaze myself when i saw the intercooler and piping not damage)

3” exhaust system (not too sure what it is bought it with the car)

R33 turbo (was already in the car when i bought it)

Heavy duty clutch

Struct bar

Stock suspension (changed the suspension because it was too low and my aftermarket front bar was like a few cm off the ground)

No pod filter (but will throw in a SARS pod filter for buyer)

No air flow meter as i SOLD IT to a mate.

Interior:

Interior is in ok condition few smoke burns on the driver and passenger seat and back

Blitz boost gauge

JVC head unit (with Bluetooth + remote)

2 6x9 Kenwood speakers in the back

2 Kenwood splits in the front (with stock front speakers but is fuzzy so i tuned it to the rear speakers only not that much to get new speakers)

Wiring for sub and amp (ready to plug and play)

Exterior:

A few scratches on the body (due to people leaning on the car with their belts but not that bad)

Stock GTR rims few gutter marks (with 60-70% tread)

BN - side skirts (hasn’t been painted still white few cracks)

BN – rear bumper (hasn’t been painted)

No front bar as it was damage in accident (it was a stock front bar) but can throw in my aftermarket front bar as i took it off to get repaired but since the car was in the accident i didn’t repair the front bar for an extra $150 ono up to the buyer just make an offer. Can see picture of the front bar if u are interested

The bads:

Need new central locking (use remote but car door does not locked)

Passenger window only can go down (only driver can make go up or down)

The side skirts and rear bar was just quickly fitted there are gaps and it was pop-riveted on so u need to take it off and then re-fit (but the front bumpers was a fitted nicely no gaps)

$4000 ONO

Could either fix it and sell it or drift it or turn it to a daily car

Im open to offers so why not throw me an offer but please no time wasters!!!

Welcome to have an inspection. Maybe more stuff but that all i can think of at the moment.

Call or message me for more details or information:

Name: bee

Contact: 0411 733 547

Located in SA (Parafield Gardens)

NOTE: its not as bad as it looks, come see it in person if your interested. Open to offers but no bullshit offers the engine is still fine.

Attached thumbnail(s)

  • post-44592-12644386578718_thumb.jpg
  • post-44592-12644395501528_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/305494-r32-gtst-cheap-cheap-open-to-offers/
Share on other sites

If your willing to separate parts i will buy all these following parts for the passenger side front. Could you Pm me prices and your location if your willing to thanks.

Lower control arm

Castor Rod

Swaybar mount

Tie Rod

Castor Rod Brackets Pair

yea more pics under engine bay and the passenger side front. Saying "minor" damage is very misleading to the inexperienced eye buddy, looks like your pulling your willy too much.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...