Jump to content
SAU Community

Recommended Posts

Hi guys,

I recently changed my spak plugs and found 1 of the spark plug tubes had oil covered at the bottom of it. The old spark plug had oil on it as well.

The 6th cylinder seems to only have the leak which is the one closest to the firewall, passenger side bank.

I know this is a common problem, has anyone attempted to fix this? It is the rocker cover gasket that requires replacement ? Are there any other gaskets that surround each individual spark plug they may also be the cause or is it the rocker cover gasket only that exists. Your help is appreciated

Cheers

Not sure on that one but I was definately able to replace. I have the invoice at home somewhere. Apparently it was a bit of a tough job getting them out but eventually was done. Fixed the oil pooling problem in any case :)

Edited by Easy Tiger

aww, I just been told with the same issue when i took my car for 90000km service this morning, they telling me "the left side rocker cover is leaking and need to replace it"...

still waiting phone call for the price quote, not for if they gonna replace entire rocker cover or just the gasket...

Japav,

Do what I did....Just wipe it all clean and shove a towel to soak up the excess in the sparkplug well...then screw the new spark in....i did mine 3,000kms ago and no issues - plus, I got better fuel economy with the new sparks.

I honestly would have had the leak fixed, but since my old man said it was fine, then I wasn't as worried...

And, by the way, the leak is 'always' found on the cylinder closest to the driver...the rest are fine.

Japav,

Do what I did....Just wipe it all clean and shove a towel to soak up the excess in the sparkplug well...then screw the new spark in....i did mine 3,000kms ago and no issues - plus, I got better fuel economy with the new sparks.

I honestly would have had the leak fixed, but since my old man said it was fine, then I wasn't as worried...

And, by the way, the leak is 'always' found on the cylinder closest to the driver...the rest are fine.

I think you mean passenger side cylinder closest to the firewall, yes?

Japav,

Do what I did....Just wipe it all clean and shove a towel to soak up the excess in the sparkplug well...then screw the new spark in....i did mine 3,000kms ago and no issues - plus, I got better fuel economy with the new sparks.

I honestly would have had the leak fixed, but since my old man said it was fine, then I wasn't as worried...

And, by the way, the leak is 'always' found on the cylinder closest to the driver...the rest are fine.

I've heard cleaning the sparkplug well and then running some high temp silicone with your fingers along the side works to cover any minor cracks in the seals as well.

Can be any plug that fills up, just most likely the rear ones.

I found the quickest way to remove the oil is with a big syringe with some rubber hose on the end.

If you can get some silicone under the rubber with a small flat blade screwdriver it should seal pretty well but I would suggest removing the rocker cover to do the job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
×
×
  • Create New...