Jump to content
SAU Community

Recommended Posts

Yeah I understand that but to me it don't make sense if you take the car to the track twice a year.

Would it not be more practical to get some Coilovers and some decent sway bars then spending money on a cage?

That would be much more effective if your looking for stiffness.

Cage = Cop bait

You are more likely to be asked to step out your car if they see a cage, so they can "have a look".

Just my point of view its just something to think about.

there is nothing illegal about a half-cage if the car is a rego 2 seater. if you have tint and the cage isn't painted a bright colour most of the time you can't see it unless you are looking for it.

but yes coilovers and the rest of your suspension setup should be done 1st before a cage if its primary uses is to increase stiffness.

a roll cage does not only protect you if you roll your car but it increases the stiffness of the car. It makes a huge different it is noticeable!

If done correctly you should have zero issue with the police, even if you don't re-rego your car as a 2-seaters i doubt you will have an issue. A friend has been driving around his R33 with a half cage (strip rear, carpet in its place) and never had an issue. another friend running a full-cage again has had no issue and he has been stop by police afew times

Ive failed pits a couple years ago with a full cage so your mate must be really lucky

Never heard of a full cage legal

/interested

Who in perth can build halfcages?

Intune Performance

Ive failed pits a couple years ago with a full cage so your mate must be really lucky

Never heard of a full cage legal

he is just honest with the cops, tells them its his track car. the times he has been pulled over he was coming back from the track, cops let him off said just drive home

he is just honest with the cops, tells them its his track car. the times he has been pulled over he was coming back from the track, cops let him off said just drive home

Haha Lucky Bastard!

Last time my mate was honest with a cop he said "Thanks for being so honest now I can yellow you in half the time" :down:

Fail! Haha...

ive considered putting in a half cage a few times. as mentioned its perfectly legal if you re-rego as a two seater.

Theres been a few rolls at the drifts and more than a few near misses.

Those dudes being all like "omg drive on street who needs" you dont have a place to be responding to the question.

Dont alot of people get them from Bond over east in a kit? then get someone to assemble? or is it cheaper/easier to get someone in perth to do it.

I'd be interested in getting a non cams approved cage at some point.

lots of places :D

But before you ask yourself who can build cage? you need to ask do you want a cams approve cage or not.

there is a different in price

Sorry, I did mean cams approved cages..

Any monkey can build a cage, I meant who can build quality cams approved cages?:)

Also interested in a non-cams approved cage in the short term.

Cheers R32Driver :)

Edited by bubba

If your only doing track work a couple time a year I would go with a bolt in, pretty cheap and they come up from time to time in the FS forum. Having said that I'm not sold on bolt ins as a way of increasing rigidity.

Police interest. The problem lies in a full cage that

A) Restricts accessthrough the doors and

B) Obscures vision and enters the ADR mandated box that must be free from obstruction incase you bash your scone.

In the end I leave my seats in and bolt in a straight back for the day. I can count on the fingers of one hand the time I've had people in the back seat, they just add weight and weight and annoying comments ablout the music and my driving abilities are the enemy...that and I have no friends anyway.

If you wan to drop weight, run minimum fuel, get rid of spare tyre and the passenger seat when you track it. The passenger seat in a 32R is 14Kg +spare which is 10? Thats a decent weight saving

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Just a follow-up on this topic. From what I can tell so far the rusty residue on the engine block might be unrelated to a coolant leak or maybe just older than anticipated. After driving it from the winter garage to my friend's garage I could not see any new traces of coolant leaking there, but I will test this properly once I was able to fully warm up the car and drive it for a bit. I think I can agree that the whole porous engine block stuff is kind of nonsense, but there is just a silly amount of true, false and half-true information on anything Skyline-related on the internet.
    • hrmmm , not mine , easter plans to pull engine not happening     
    • I removed the IACV, cleaned it and reinstalled.  I found a video on youtube that helped with the whole process, the guy then said the idle needed to be set, so the process was to get the vehicle up to operating temperature, unplug the TPS, set the idle screw in the IACV so the RPMs were around 600, then plug the TPS back in.  After I reinstalled the IACV, the car started (because, it was a cold start), once it warmed up, the car died, I adjusted the idle screw to see if that helped anything, it did not, I had to wait about 3-5 minutes, then the car would start back up. Only to shortly cut out, and only crank.  I loosened the TPS to see if adjusting that would do anything, and when I would rotate the sensor clockwise, there was a humming noise, but it would go away when I got the sensor in the horizontal position.  It only made the hum noise with the key on.  What do you guys think? 20250414_172604.mp4
×
×
  • Create New...