Jump to content
SAU Community

Imp: A Quick King-spring Clarification

sethaiyaar
 Share

Recommended Posts

sethaiyaar Community Regular

sethaiyaar

Posted
Posted

Hi guys,

I know the lowering debate has raged countless amount of times but i need a clarification. All help is much much appreciated.

Today I was set on buying the lowered KING-SPRINGS (why? cheap, Aussie, 30% stiffer and good reputation...btw buying springs only) from my local wholesaler, went and talked to him and he had no clue what a V35 was, not even in their system!, no probs buddy don't panic since its the same as the 350Z....now my question is:

The King-Springs lower the 350Z by 30mm, since the general fact is that 350Z springs will lower the V35 COUPE and EXTRA aprox Inch (20-25mm). Will it be correct to say the final/total lowered height will be 45-55mm?

1. Does anyone have king springs on their car?

2. Does anyone have their car that low?

3. Isnt that seriously low? and suicide for the under carriage?< btw im driving around the west, Blacktown, penrith, parra etc etc

All responses appreciated asap, i wanna get this cleared up so i know if i should/shouldn't buy the springs....thanks guys so much!

robbo33 Community Regular

robbo33

Posted
Posted (edited)

If your just after springs then probably no good to get the king springs. It would be highly recommended to replace your shocks with those springs. You may also need a camber kit front and rear depending how you like your camber.

Try pedders, i know they make springs for the 350z aswell...not sure how low they are though. Ive had tein stechs which lowered the car around an inch all round...maybe slighty lower at the front.

My honest opinion and you have probably heard it a 1000 times....get coilovers

But if you after just springs you can get cheap tein stechs or eibach springs from the states under $500. Or you can buy mine for $250 ;)......but eventually you will want coils like me for a lower stance without to much ride sacrifice. ive had the pedders extreme xa coilovers for a few months now and have never looked back. They go stupidly low but the ride is awesome for a coilover....far superior to teins etc.

Edited by robbo33
robbo33 Community Regular

robbo33

Posted
Posted
Yes, I would expect those king springs to lower your car more than they would a 350z. By how much I cannot say.

In response to Robbo's post. Thats a big call about being far superior.

Im talking about ride quality on the street. i dont track the car at all. i had the tein cs and they were terrible. noisy and very rough ride. probably meant for the track more than street though. everybody i know that have the pedders are more than happy. Mainly the holden and ford boys as i dont know any v35 or 350z with them ;)

sethaiyaar Community Regular

sethaiyaar

Posted
  • Author
Posted

I understand that coil-overs might be the ultimate way to go, but you can deny the price difference, its $300 for kings and a decent coil-over set you looking close to $1.5k-2k. That is just way to much for me. Basically looking for:

-Slight improvement in roll.

-Lower centre of gravity.

-Improvement in traction when powering out in a corners (you guys may have noticed the traction lost when powering out of a corner, not track driving, just aggressive power out from normal driving)

-lower ride height! i sit just as high as some sedans out there!

I think all of that can be provided by a set of springs.

Really appreciating the input keep it coming guys.

robbo33 Community Regular

robbo33

Posted
Posted

i was happy with the drop my stechs gave me and the ride quality was almost as good as standard just slightly stiffer, but when i put the 20's on it just didnt sit low enough anymore thats the only reason i went coils. I reckon the eibach sportlines if you like it low or the tein stechs. plenty of reviews on both in g35driver.com. $300 for king springs is awesome value though!

ogz007 Rising Star

ogz007

Posted
Posted

hey man i have king springs kit on mine.. and trust me i havent had a problem with the drive train of my car.

so yeh you cant just put king springs in the shadows, this is coming from a guy who has them on...

its probably best for you to consult an actual workshop so they can see your ride in flesh rather than them refering to a 350z. this way they can give you a straight up answer and the best option they have for you.

xtc Proficient

xtc

Posted
Posted

ave king spring on aswell, arent too bad but would def need camber kit specially on the rears. if you wanted to know what it looks like then browse through the wa v ruise rd 2 hae pics on my car on there. havnt had the time around to it but after springs camber would be my next mod.

if not then you can ad another $500 or so and get those cheap ones on ebay atm. my friend has a z and stuffed up his tien coilovers (had them for 3 years) he was running short on cash so decided to buy the cheap ebays to try... hes happy with them for the price and they are height, camber adjustable aswell.

fcruz3r Experienced

fcruz3r

Posted
Posted

+1 ^ ..search through the WA cruise thread ...both xtc and my car are lowered on kings. Ride quality is good, but you will definately need a rear camber kit (or fork out new set of tyres every 15000km)

I've tried a variety of lowered springs...H&R, Tein, Eibach... and anyone that says that kings will blow ur shocks quicker than the other brands are talking out of their a$$

if ur shocks are on their way out...even the most expensive lowering springs will kill them faster, so always make sure that ur shockies are up to it before lowering.

sethaiyaar Community Regular

sethaiyaar

Posted
  • Author
Posted
hey man i have king springs kit on mine.. and trust me i havent had a problem with the drive train of my car.

so yeh you cant just put king springs in the shadows, this is coming from a guy who has them on...

its probably best for you to consult an actual workshop so they can see your ride in flesh rather than them refering to a 350z. this way they can give you a straight up answer and the best option they have for you.

thank for the input cuz, esp since you have them on. ...umm what you mean by 'kit' do you have the coil-over or the springs?

And yeah i took my car to the shop, he said he hasnt seen many of these and in his 4years working there never did a V35.

I happened to come across your car once, and was really liking your drop. So if you have the springs, then ill know exactly how low they go.

sethaiyaar Community Regular

sethaiyaar

Posted
  • Author
Posted
+1 ^ ..search through the WA cruise thread ...both xtc and my car are lowered on kings. Ride quality is good, but you will definately need a rear camber kit (or fork out new set of tyres every 15000km)

I've tried a variety of lowered springs...H&R, Tein, Eibach... and anyone that says that kings will blow ur shocks quicker than the other brands are talking out of their a$

if ur shocks are on their way out...even the most expensive lowering springs will kill them faster, so always make sure that ur shockies are up to it before lowering.

thanks dude, yeh i had a look...first, neat ride...secondly, umm about the shocks, im guessing a mechanic would be the person to consult about their condition or are there some markers that any normal person can chk out?

sethaiyaar Community Regular

sethaiyaar

Posted
  • Author
Posted
ave king spring on aswell, arent too bad but would def need camber kit specially on the rears. if you wanted to know what it looks like then browse through the wa v ruise rd 2 hae pics on my car on there. havnt had the time around to it but after springs camber would be my next mod.

if not then you can ad another $500 or so and get those cheap ones on ebay atm. my friend has a z and stuffed up his tien coilovers (had them for 3 years) he was running short on cash so decided to buy the cheap ebays to try... hes happy with them for the price and they are height, camber adjustable aswell.

thanks for the advice xtc, i had a look at your car...firstly its looks very very nice!...secondly ill have a look at camber kits a bit later down the road....for a lil while let me enjoy the extreme camber....but not looking forward to the tyre expenditure lol.

fcruz3r Experienced

fcruz3r

Posted
Posted
thanks dude, yeh i had a look...first, neat ride...secondly, umm about the shocks, im guessing a mechanic would be the person to consult about their condition or are there some markers that any normal person can chk out?

they usually wear out about 40000 -50000km

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...