Jump to content
SAU Community

Please Help!!

hipster

By hipster,
in Engines & Forced Induction

 Share

Recommended Posts

hipster Contributor

hipster

Posted
Posted

Ok, Heres my problem.

Today (Boxing Day) I started my car and took off fairly hard bringing first gear up to about 6000, I then proceeded to change to 2nd hoping for that nice wheel spin can be achieved from this. Alas I was not greeted with wheel spin but a great loss of power like bad turbo lag instead.

Now to my problem, ever since this every time I get the revs to 3000 in any gear from 2nd up, the revs suddenly jump to 4500 and then back to 3000.

There is no jolt when this happens, just an over revving laggy engine.

Also there is now a slight ticking noise coming from under the left hand side of the bonnet when the car is idling.

I am thinking that it could possibly be a blown turbo gasket? But it has all happened so suddenly after me being stupid and not allowing my car to warm up correctly.

Could this be the cause, What are everyones thoughts?

BTW my car is stock except a 3in cat back.

Any help is greatly appreciated as I am fairly new to the world of turbo cars, and my mechanical knowledge of cars in general isn't exactly in depth, so go easy on a newby

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/
Share on other sites
Anquetil Mentor

Anquetil

Posted
Posted

Ticking sound from the around the turbo certainly sounds like a blown turbo gasket, I had similar problem a while back.

If it is, its not an expensive fix.

Poke your head in the pasenger side of the engine, you may be able to see the problem.

Dont go flogging it, cause if its the gasket you dont want more pieces of the gasket breaking off and flowing through the various parts of your engine.

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/#findComment-619200
Share on other sites
hipster Contributor

hipster

Posted
  • Author
Posted

Thanks mate. What exactly am i looking for with a blown gasket. As I said I am a complete newby to the world of turbos, but I am doing my best to learn about them.

I know where the turbo is located but what exactly would the blown gasket look like?

Any help is greatly appreciated, as none of the mechanics in my area that I would trust to work on my car are open due to the holidays.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/#findComment-619264
Share on other sites
Merli Grand Master

Merli

Posted
Posted
Now to my problem, ever since this every time I get the revs to 3000 in any gear from 2nd up, the revs suddenly jump to 4500 and then back to 3000.

Sounds like it could be a slipping clutch to me?

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/#findComment-619804
Share on other sites
PRO_32 Proficient

PRO_32

Posted
Posted

Trying to decipher your problem as a couple of the other guys have stated it does sound like it could be your cluth that is the problem.

But just to clarify something for you you say it feels like and over-revving LAGGY engine

Over-revving does indicate slipping clutch ( you can check this by loading the engine in a higher gear at relatively lower speeds) caution though be careful not to do to much damage

Lag is the lack of REV's or "pick up" when you accelerate theoritically opposite ends of the spectrum.

but anyway good luck.

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/#findComment-620225
Share on other sites
hipster Contributor

hipster

Posted
  • Author
Posted

thanks for all the replies everybody (and for the definition of laggy).

Sorry for the late reply computer problems, it never ends!

As it turns out the clutch was the problem, took it to autosport and they had it diagnosed about 2 seconds after getting into the car.

Anyway, it is now replaced with a heavy duty item and is going better than when I first bought it. It is even creating up to 10 psi boost (only could get 7 before new clutch).

So in summary thanks for the help, and these forums have now become my official home away from home. Such a wealth of valuable information!

cheers

Link to comment
https://www.sau.com.au/forums/topic/30565-please-help/#findComment-630935
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I elongate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for?   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • sonicii
      Rv37 400r questions

      By sonicii · Posted

      No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
×
×
  • Create New...