Arc Box + Gt 35 R

[GUN_METAL_GTR32]

hi guys

just a quickie for u all i have an arc air box atm and i want to fit a high mounted gt35 but still wanna use the air box as it was quite expensive and i think it is quite schmick looking in the engine bay

what i wanted to know is if i can make it fit with this turbo obviously with custom piping

i wont have a afm either as i will be using a wolf v500

cheers

julz

[Angus Smart]

cant see why not man, you will need a nice custom dual to single entry from the box to the turbo.

or cut a bigger hole in the arc box but you'll loose the bell mouth bits which i think help the flow.

[N1GTR]

Custom pipes and it will be possible, but it won't be super easy if that's what you're thinking

[Adriano]

It would probably end up cheaper to make a new schmick airbox and sell the arc one

[bubba]

What car? what exhaust manifold?

I'm going to be running an ARC airbox in my 32gtst with high mounted GT35R on a 6boost manifold on my RB30DET. I have fitted 32R cooler/piping/bov's.

It's going to be tight but I do have enough room for the airbox, bov recirc and cooler pipe. I won't be able to fit an AFM in though so I'm going to pull the Haltech out of my wagoon and run that in the 32 as it has a 3bar map sensor.

[GTScotT]

anything is possible

+1 to custom pipes

[GUN_METAL_GTR32]

6 boost manifold

plazmaman plenum

custom cooler piping

no afm as im running a wolf as posted earlier

im not worried about easy my mates a very good mechanic who will be doing it and we have both done alot of fab work for our cars before

Edited January 27, 2010 by GUN_METAL_GTR32

[bubba]

Should be asily doable with full custom cooler piping.

I'm using stock GTR piping setup so it has the bulkhead fittings, the airbox clears them and there looks like there will be enough room to get a couple of bends in there.